Calibration Products & Services
If you are interested in being listed contact us.
Product Manufacturers
|
E& E Elektronik, GmbH Engerwitzdorp, Austria Tel +43-7235-605-0 Fax +43-7235-605-8 hentscholek.w@epluse.at www.epluse.net |
Manufactures temperature, relative humidity and air velocity instrumentation: sensors, transmitters, calibrators and data loggers. Temperature to 25 deg C±3 deg C. Relative humidity 70%-90% RH. Also calibration services for relative humidity and temperture. Accredited to ISO 17025. Certified ISO TS16949, ISO 9001:2000. |
|
Badgerland Products, Inc. Twin Lakes, WI. Tel: 414-877-2158 Fax: 414-877-2150 www.badgerlandproducts.com |
Calibration labels. |
| Q-Cee's Product Corporation Tel: 800-950-4922 Tel: 401-432-8197 Fax: 800-285-7016 |
Calibration, inspection, process control, tamper-evident labels and software. |
Chemical Detection and Analysis
| Princeton Gamma-Tech Instruments Inc. Princeton, NJ Tel: 585-233-0950 pgregory@pgt.com (Peter Gregory) www.pgt.com |
Princeton Gamma-Tech Instruments is a leading supplier of X-ray and Gamma-ray Detectors and Spectroscopy systems, portable Radioisotope Identifiers, and portable Chemical Analyzers. |
| Gerbig Engineering Company Burnsville, MN Tel: 888-628-0056 Fax: 952-960-4410 info@gerbig.com www.gerbig.com |
Cleanroom design, fabrication installation and cleanroom certification. We install modular and softwall cleanrooms and sell cleanroom supplies and accessories. |
| Lighthouse Worldwide Solutions Milpitas, CA (For worldwide locations, see website) Tel: 408-945-5905 Fax: 408-942-1032 usa@golighthouse.com www.golighthouse.com |
Aerosal particle counters, surface particle counters, liquid particle counters, amc monitoring equipment, minienvironmental control and environmental instruments, ultra pure water insruments. Also provides Contamination, Particulate, AMC, ESD monitoring and control solutions to many different industries including Semiconductor, Pharmaceutical, Data Storage, Biotechnology, and Defense, among others. Also provides calibration service. |
| AccuMetria Eugene, Oregon Tel: (541) 687-9148 support@accumetria.com www.accumetria.com |
Provides off-line programming and simulation for Coordinate Measuring Machines. AccuMetria uses an inTel:ligent, metrology-based programming environment to easily create and edit CMM programs. Fully integrated into SolidWorks 2003, AccuMetria also provides CMM motion simulation complete with collision detection. |
| AdvanTech Manufacturing New Berlin, WI Tel: 800-511-2096 Fax: 262-786-5074 sales@advantechmfg.com www.advantechmfg.com |
NIST traceable certification and calibration service on new and used test sieves - all sizes. Measurement data, statistics, and pass/fail information included. Manufacturers of brass and stainless steel Test Sieves, ARROW sieve shakers and L3P Sonic Sifter. |
| Assurance Technologies, Inc. Chicago, IL Tel: 630-231-4800 Fax: 630-231-8844 colleen@atiquality www.atiquality.com |
Accredited to ISO 17025. Wide range of dimensional, mechanical and optical instrumentation including optical & video comparators, optical & video inspection equipment, hand gages & tools, hardness testers, SPC hardware & software, and CMMs. Also provides calibration service for dimensional, mechanical equipment. |
| Bal-tec Tel: 323-582-7348 Fax 323-582-0934 info@precisionballs.com www.precisionballs.com |
Custom manufactured balls in any size, any quantity, any material, any quality level required. Ball bars, ball gages and a complete line of CMM accessories for CMM calibration. |
| Blanchette Tool & Gage Clifton, NJ Tel: 973-471-2100 Fax: 973-471-2104 info@blanchettetool.com www.blanchettetool.com |
Dimensional inspection gages, including the Sheffield Visual Gage Comparator, air gage tooling, gaging fixtures. Also provides calibration service for dimensional equipment. |
| Brown and Sharp Ltd. Telford, United Kingdom Tel +44 1952 681 359 Fax +44 1952 681 310 ajones@uk.bnsmc.com www.e-metrology.com |
Accredited by UKAS. Manufacture dimensional equipment for primary level calibration. Also provides calibration service for gage blocks using interferometry and prismatic & round parts using nanometer CMM. |
| DFM Lyngby, Denmark Tel +45-4593-1144 Fax +45-4593-1137 info@dfm.dtu.dk www.dfm.dtu.dk |
Accredited for mass, length, electricity, optical power. Primary Standards Laboratory. Manufactures products for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, pressure, electrolytic conductivity and calibration software. Also provides calibration service for mechanical, electrical, optical instruments. |
| Digitargos Ltd. Szigetmonostor, Hungary Tel +36 20 333-8279 Fax +36 26 593-009 office@digitargos.com www.digitargos.com |
Manufacturing custom tailored complex systems for integrated, in-line, in-process, 100%, automated inspection. Industrial metrology for 100% quality control. Consultancy for metrology tasks in industrial applications. Integrating and deploying different measuring theories, such as optical, machine vision, eddy current, inductive, capacitive sensoring, X-ray, laser, mechanics, etc. Unique systems for specific metrology tasks. Delivering complex services containing mechanics, electronics, software, communication, statistics, implementation, launch, training, etc. for solving complex inspection tasks. |
| Dimensional Certification, Inc. Tel: 248-547-7242 barry@dimcert.com www.dimcert.com |
Portable, 3-D measuring services utilizing Faro/SMX and Leica laser trackers, MetricVision laser radar systems, portable CMM arms and computer assisted optics. Contract inspection, alignments, calibrations, reverse engineering as well as equipment rentals throughout the world. ISO certified. |
| Mahr Federal Inc. Providence, RI Tel: 401-784-3100 Fax: 401-784-3246 information@mahr.com www.mahrfederal.com |
Manufacturer of Dimensional Measuring Equipment Including Dimensional Standards, Gage Calibration Systems, Metrology Lab Gages, Form, Surface Roughness & Contour Metrology Systems, Laser/Optical/Touch Probe CMMs, Custom Design & Build Gages, and Hand Held and Bench Precision Gages. Gage Repair & Calibration- Calibration System is Accredited to ISO 17025. |
| MetroCal, Inc. Kentwood, MI. Tel: 616-698-3124 Fax: 616-698-2364 www.metrocal.com |
|
| Morgan Precision Instruments Akron, Ohio Tel: 330-896-0846 Main office Tel: 330-563-0077 CMM Department Fax: 330-896-3445 jgeib@morgangages.com www.morgangages.com |
Manufactures custom inspection gages, provides Calibration and CMM dimensional contract inspection services to all industries. We are ISO/IEC 17025 Accredited and Certified to ISO 9001:2000 without design. For your custom inspection gage solutions contact us today. Quality Managers, Improve your department's throughput, get your layout department out of the weeds, we provide turnkey CMM programs your operators can just download and run. |
| Optodyne, Inc. Compton, CA. USA Tel: 800-766-3920 Tel: 310-635-7481 Fax: 310-635-6302 sales@optodyne.com www.optodyne.com |
Accredited to ISO 17025. Laser-based measurement and inspection equipment for precision machine tools and stages as well as displacement calibration. |
| PMC Lone Star www.pmclonestar.com |
PMC Lone Star and PMC Mercury are the premier leaders in the manufacture and calibration of high quality gages, metrology equipment and instruments. |
| Pratt & Whitney Measurement Systems Tel: 800-371-7174 Fax: 860-286-7878 info@prattandwhitney.com www.prattandwhitney.com |
Manufacturer of dimensional metrology systems including the Labmaster Universal and Supermicrometer instruments. |
| Precision Tool Works Hamilton, Ontario, Canada Tel: 905-304-4730 Fax: 905-304-6021 info@precisiontoolworks.com www.precisiontoolworks.com |
Canada's gauge repair and rebuilding specialists. Rebuilding the finest measurement tools in the world, we use state of the art cleaning systems, Swiss tooling, OEM replacement components and the finest watchmaker's lubricants. Servicing Mitutoyo, Interapid, Brown and Sharpe, Tesa, Compac, Starrett and Mahr Federal. |
| Quality Inspection Technologies Beamsville, Ontario, Canada Tel: 905-563-9994 sales@qualityinspection.net www.qualityinspection.net |
Description of services: QIT is an ISO17025 accredited laboratory specializing in dimensional inspection and reverse engineering utilizing the latest in cnc cmm and portable cmm technology and software. Dimensional calibration and repair for hand tools such as; micrometers (inside/outside/depth), calipers, dial/test indicators, height gauges, length standards, setting rings, thread plug gauges, thread wires, pins, squares, etc. |
| QC Inspection Services, Inc. Burnsville, Minnesota 55337 Tel: 800-959-0632 dmedford@qcinspect.com www.qcinspect.com |
We provide first article inspection and reverse engineering in our ISO 17025 accredited lab as well as hundreds of quality-related training workshops throughout the nation . We use 15 of the best state-of-the-art CMMs and we employ only CQI certified inspectors and design engineers. We can also provide reverse engineering services on these CMMs as well as on our two laser based scanners and a high-accuracy micro laser scanner. For large parts, we can measure them on our portable CMM at your site or ours. |
| Renishaw, Inc. Hoffman Estate, IL Tel: 847-286-9953 Fax: 847-286-9974 usa@renishaw.com www.renishaw.com |
Registered ISO 9001. Manufacture equipment for dimensional, mechanical, optical, pressure, temperature, time/frequency including CMM products, digitizing systems, machine tool products, position encoders, raman spectroscopy and probes. |
| Third Dimension Software, Ltd. Tel: +44 (0) 117 9892450 Fax +44 (0) 117 9892451 info@third.com www.third.com |
Designs and produces advanced non-contact dimensional metrology systems for industry and manufacturing. Bristol, United Kingdom. |
| Tru-Stone Technologies Waite Park, MN Tel: 800-959-0517 or 320-251-7171 Fax: 320-259-5073 sales@tru-stone.com |
We are a precision granite manufacturer of granite machine bases and OEM assemblies as well as surface plates, master squares, master angles, angle plates, parallels, straight edges, planekators and other metrology accessories. Our calibration lab provides dimensional, surface finish, flatness, parallelism, perpendicularity, repeat reading, etc. calibrations for granite and ceramic. Accredited to ISO/IEC 17025 by A2LA and ISO 9001 registered. |
| Velmex Bloomfield, NY Tel: 585-657-6151 Fax: 585-657-6153 www.velmex.com |
Manufactures and distributes precision manual and motor driven linear slides, X-Y elevating and rotary tables, computer controlled multi-axis UniSlide Assemblies for scanning, indexing and positioning. |
| VLSI Standards, Inc. Tel: 408-428-1800 Fax: 408-428-9555 sales.support@vlsistd.com www.vlsistd.com |
ISO 9000 certified. Manufactures physical artifacts used to calibrate metrology instruments in the semiconductor and disk drive manufacturing industries. Our products include silicon dioxide film thickness standards, 200 mm resistivity standards, step height standards, absolute contamination standards and others. |
| Alpha Electroncs Minneapolis Tel: 763-258-8513 Minneapolis Fax: 763-258-8515 Chuluota Tel: 407-359-8119 Chuluota Fax: 407-359-4226 jwilley@alpha-amer.com www.alpha-amer.com |
Manufacture electrical instrumentation including resistors: standard air, metal foil, power surface mount, thermo sensitive, thin film, and through hole. |
| Andeen-Hagerling Tel: 216-349-0370 Fax: 216-349-0359 info@andeen-hagerling.com www.andeen-hagerling.com |
Ultra-high precision capacitance bridges & standards for electrical, pressure, temperature and thermal expansion measurement. |
| Ballantine Laboratories, Inc. Cedar Knolls, NJ Tel: 973.984.1900 Fax: 973.984.1479 sales@ballantinelabs.com www.ballantinelabs.com |
Among the country's oldest manufacturers of electronic instruments. Since it's founding in 1935, it has delivered state of the art calibration instruments and services to calibration laboratories and instrument users worldwide. Today, the manufacturing division offers precision AC voltmeters, AC voltage and current standards, Oscilloscope calibration systems and SpectrumAnalyzers. Calibration procedures meet or exceed the ANSI Z-540-1 and MIL-STD-45662-A requirements. |
| Beamex, Inc Marietta, GA 3006 Tel: 800 888-989 Tel: 770-951-1927 Fax: 770-951-1928 info@beamex.com www.beamex.com In Europe: Beamex Oy Ab Pietarsaari FINLAND Tel +358 10 550 5000 Fax +358 10 550 5404 info@beamex.com www.beamex.com |
Beamex is a technology and service company that develops, manufactures and markets high-quality calibration equipment, software, systems and services for the calibration and maintenance of process instruments. The company is a leading worldwide provider of calibration solutions that meet even the most demanding requirements. |
| Berkeley Nucleonics San Rafael, CA Tel: 415-453-9955 Fax: 415-453-9956 info@berkeleynucleonics.com www.berkeleynucleonics.com www.digitaldelaygenerators.com |
Berkeley Nucleonics Corporation is a leading manufacturer of precision electronic instrumentation for test, measurement and nuclear research. |
| Cox Instrument Bensalem, PA Tel: 215-639-0900 Fax: 215-639-15970 www.cox-instrument.com |
Manufactures electrical, flow and temperature equipment: flow meters, flow computers, totalizers, rate meters, hydrometers, flow straighteners, calibrators, test stands, flow manifold systems. Also provide calibration service and verification for electrical and flow equipment. Accredited to ANSI/NCSL Z540-1-1994, ISO Guide 25; certified to ISO 9001:2000, ISO 10012:1. |
| Cryogenic Ltd Tel +44-181-743-6049 Fax +44-181-749-5315 info@cryogenic.co.uk www.cryogenic.co.uk |
Accredited by UKAS. Quantum Hall primary resistance standard, portable cryogenic current comparator (CCC) bridge, labview software for automated measurements and analysis. |
| DFM Lyngby, Denmark Tel +45-4593-1144 Fax +45-4593-1137 www.dfm.dtu.dk info@dfm.dtu.dk |
Accredited for mass, length, electricity, optical power. Primary Standards Laboratory. Manufactures products for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, pressure, electrolytic conductivity and calibration software. Also provides calibration service for mechanical, electrical, optical instruments. |
| Electronic Development Labs, Inc. Danville, VA Tel: 434-799-0807 Fax: 434-799-0847 vastrovs@edl-inc.com www.edl-inc.com |
Temperature sensors, temperature measuring instruments, calibration equipment, temperature mapping equipment. Also provides calibration services for temperature. Also provides consulting engineering services as SRG Group. |
| Fluke Corporation Everett, WA/USA. Tel: 800-44-FLUKE Tel: 425-347-6100 Fax: 800-FLUKE-FAX Fax: 425-356-5116 info@tc.fluke.com www.fluke.com In Europe: Fluke Europe B.V. Eindhoven, The Netherlands. Tel: +31-40-2675-200 Fax: +31-4-2675-222 calibration_info@fluke.nl |
Accredited by NVLAP & DKD. Primary Standards Laboratory, Calibration Laboratory, Verification Laboratory. Manufactures reference standards for voltage, current, resistance, ratio. Manufactures multi-product calibrators, oscilloscope calibrators, meter calibrators and compact professional electronic test tools for electrical, frequency, pressure & temperature, calibration and lab management software. Provides calibration service for dimensional, mechanical, temperature, electrical, frequency, pressure and time instrumentation. Provides training seminars throughout year on lab management, calibration software, fundamentals of metrology. |
| GMW Associates Tel: 650-802-8292 Fax: 650-802-8298 ian@gmw.com www.gmw.com |
Magnetic field and magnetic flux measurement instruments, current transducers for isolated electric current measurement. Also distributor for electrical test & measurment instrumentation. |
| Guildline Instruments Tel: 613-283-3000 Fax: 613-283-6082 www.guildlineUSA.comor www.guildline.ca |
Resistance/temperature bridges, resistance standards, current shunts, digital thermometers, DC potentiometers, decade boxes, teraohmmeters, nanovoltmeters. Also provides calibration service for temperature, electrical, pressure. |
| Hypres, Inc. Tel: 914-592-1190 Fax 914-347-2239 www.hypres.com |
Josephson voltage standard chips & systems. |
| IET Labs, Inc. Westbury, NY 11590 Tel: 516-334-5959 Fax: 516-334-5988 sales@ietlabs.com www.ietlabs.com |
Compliant with ISO 9001, ISO 17025, ANSI Z540-1-1994, and MIL-STD-45662A. Manufactures R-L-C, RTD, standards and decades, voltage and current sources, strobes, audio. |
| Measurements International Tel: 315-393-1323 Fax: 315-393-1452 micanada@mintl.com www.mintl.com |
ISO 9000 certified. Automated primary electrical standards for DC metrology and AC power. Also provides calibration service for electrical. |
| Ohm Labs, Inc. Pittsburgh, PA Tel: 412.431.0640 Fax: 412.431.0649 www.ohm-labs.com |
Resistance standards, precision shunts, laboratory high voltage dividers. Developers of the SmartResistor and the temperature stabilized current shunt. A company focused solely on "Excellence in Resistance." |
| Oxford Instruments Tel +44-(0)-1223-627400 Fax +44-(0)-1223-625050 info.oiplc@oxinst.co.uk www.oxinst.com |
Quantized Hall primary resistance standards. Cryogenic electrical substitution absolute radiometer. |
| PPM, Inc. Tel: 216 595-3200 Fax: 216 595-3203 Info@ppminc.com www.ppminc.com |
PPM manufactures precision nullmeters for use with Kelvin Varley Voltage Dividers. PPM also manufactures electronic power loads, ohmmeters, signal conditioners, multi channel isolated voltage sources and precision Kelvin probes. |
| QuadTech, Inc. Marlborough, MA/USA Tel: 508-485-3500 Tel: 800-253-1230 Fax: 508-485-0295 sales@quadtechinc.com www.quadtechinc.com |
Electrical, LCR standards & decades, LCR meters & bridges, hipot testers, megohmeters & milliohmeters. |
| Rohde & Schwarz Tel: 888-837-8771 info@RSA.rohde.schwarz.com www.rohde-schwarz.com/usa |
Rohde & Schwarz is one of the world's leading manufacturers of test and measurement equipment. We offer a single box signal generator and calibration solution as well as a complete range of signal and spectrum analyzers, signal generators, power meters and sensors. |
| Ross Engineering Corp. Campbell, CA info@rossengineeringcorp.com www.rossengineeringcorp.com |
We design, manufacture and test a wide range of electronic and electro-mechanical high voltage devices, including: Relays, Probes, Voltmeters, Voltage Dividers, Switches, Breakers, Systems, Controls, Energy Sources and Safety Equipment that are marketed worldwide. Our calibration capabilities are up to 450KV PK 60Hz, 400KV DC and 400KV 1.2x50µS lightning impulse. ISO 9001:2000 QMS Certified. |
| Scandura & Fem S.r.l. Rodano Millepini, Italy Tel +39 02 95320021 Fax +39 02 95328231 scandura@scandura.it www.scandura.it |
Scandura & Fem S.r.l., one of the most qualified and well-known companies in the field of instrument calibration and systems, is fully capable o offer the specific tailored solutions and customized applications in: reference calibration laboratories, chemical laboratories, process instruments, field & workshop measuring instruments and systems, pressure and temperature generators, portable multifunction calibrators, control and safety valve testers, testers and simulators, calibration and maintenance equipment. |
| Tegam Inc. Tel: 440-466-6100 Fax: 440-466-6110 sales@tegam.com www.tegam.com |
Manufactures modular oscilloscope calibration instruments, impedance measurement instruments, resistance measurement instruments and standards, AC standards and measurement instruments, handheld temperature & electrical test instruments, RF and microwave products (power calibration & attenuation measurement). |
| Total Temperature Instrumentation, Inc. Williston, VT Tel: 800-235-8367 Tel: 802-863-0085 Fax: 802-863-1193 sales@ttiglobal.com www.ttiglobal.com |
Manufacturer's exclusive US representative for temperature, pressure, process calibrators. Also provides calibration services for temperature, pressure, electrical. |
| VLSI Standards, Inc. Tel: 408-428-1800 Fax: 408-428-955 sales.support@vlsistd.com www.vlsistd.com |
ISO9000 certified. Manufacture physical artifacts used to calibrate metrology instruments in the semiconductor and disk drive manufacturing industries. Our products include silicon dioxide film thickness standards, 200 mm resistivity standards, step height standards, absolute contamination standards and others. |
| Yokogawa Corporation of America Tel: 770-253-7000 Fax: 770-251-2088 info@yca.com www.yca.com |
ISO 9000 registered. NIST traceable. Manufacture test and measurement, recorders, data acquisition, power analyzers, digital oscilloscopes, dataloggers, manometers, function generators, arbitrary generators, counters, DC voltage/current standards, thermometers, watt converter, DC source standard. Also provides calibration service. |
| DFM Lyngby, Denmark Tel +45-4593-1144 Fax +45-4593-1137 info@dfm.dtu.dk www.dfm.dtu.dk |
Accredited for mass, length, electricity, optical power. Primary Standards Laboratory. Manufactures products for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, pressure, electrolytic conductivity and calibration software. Also provides calibration service for mechanical, electrical, optical instruments. |
| Lighthouse Worldwide Solutions Milpitas, CA (For worldwide locations, see website) Tel: 408-945-5905 Fax: 408-942-1032 usa@golighthouse.com www.golighthouse.com |
Aerosal particle counters, surface particle counters, liquid particle counters, amc monitoring equipment, minienvironmental control and environmental instruments, ultra pure water insruments. Also provides Contamination, Particulate, AMC, ESD monitoring and control solutions to many different industries including Semiconductor, Pharmaceutical, Data Storage, Biotechnology, and Defense, among others. Also provides calibration service. |
| Alicat Scientific Tel: 520-290-6060 Fax: 520-290-0109 spaTel:@alicatscientific.com www.alicatscientific.com |
Mass flow meters, mass flow controllers, volumetric flow meters and volumetric flow controllers and pressure gauges and pressure controllers. |
| Ametek Tel: 813 536-7831 Fax: 813-539-6882 www.ametek.com |
Deadweight Testers, Dry-Block Temperature Calibrators. Also provides calibration service. |
| Ameritrol, Inc. Vista, CA Tel: 760-942-3350 Toll free: 1-800-910-6689 Fax: 760-942-3993 sales@ameritrol.com www.ameritrol.com |
Flow switches for use in liquids, gases and slurries. The devices can be calibrated to switch at given flow rate providing a lower cost alternative to flow meters. |
| Andeen-Hagerling Tel: 216-349-0370 Fax 216-349-0359 info@andeen-hagerling.com www.andeen-hagerling.com |
Ultra-high precision capacitance bridges & standards for electrical, pressure, temperature and thermal expansion measurement. |
| Beamex, Inc Marietta, GA Tel: 800 888-989 Tel: 770-951-1927 Fax: 770-951-1928 info@beamex.com www.beamex.com In Europe: Beamex Oy Ab Pietarsaari FINLAND Tel +358 10 550 5000 Fax +358 10 550 5404 info@beamex.com www.beamex.com |
Beamex is a technology and service company that develops, manufactures and markets high-quality calibration equipment, software, systems and services for the calibration and maintenance of process instruments. The company is a leading worldwide provider of calibration solutions that meet even the most demanding requirements. |
| Bios International Butler, NJ Tel: 973-492-8400 Fax: 973-492-8270 sales@biosintl.com www.biosint.com |
High accuracy flow calibrators that are field rugged. High turndown allows two to three units to cover the range of 5 sccm to 50 slm, reducing costs for MFC calibration. |
| Cox Instrument Bensalem, PA. Tel: 215-639-0900 Fax: 215-639-1597 www.cox-instrument.com |
Manufactures electrical, flow and temperature equipment: flow meters, flow computers, totalizers, rate meters, hydrometers, flow straighteners, calibrators, test stands, flow manifold systems. Also provide calibration service and verification for electrical and flow equipment. Accredited to ANSI/NCSL Z540-1-1994, ISO Guide 25; certified to ISO 9001:2000, ISO 10012:1. |
| DFM Lyngby, Denmark Tel +45-4593-1144 Fax +45-4593-1137 info@dfm.dtu.dk www.dfm.dtu.dk |
Products for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, pressure, electrolytic conductivity and calibration software. Primary Standards Laboratory. Accredited for mass, length, electricity, optical power. Also provides calibration service for mechanical, electrical, optical instruments. |
| Dickson Company Tel: 800-323-2448 Fax: 800-676-0498 dicksoncsr@dicksonweb.com www.dicksonweb.com |
Full line of data loggers, circular chart recorders, hand held instruments and software for monitoring and recording temperature, humidity, and pressure. Calibration services for any brand of temperature or temperature/humidity instruments. |
| DH Instruments Tel: 602-431-9100 Fax: 602-431-9559, mfoster@dhinstruments.com www.dhinstruments.com |
The DHI Calibration Laboratory is accredited to ISO/IEC 17025 and ANSI/NCSL Z540-1-1994 for both pressure and flow calibration by the American Association for Laboratory Accreditation (A2LA). The DHI Laboratory Quality Assurance program is also in audited compliance with applicable United States Nuclear Regulatory Commission (NRC) Standards and has been regularly audited and approved by NUPIC. Values and uncertainties reported are directly traceable to the United States National Institute of Standards and Technology (NIST) as well as to European and Japanese national standards. Manufactures pressure instrumentation: PPC™ pressure controller/calibrators, PG7000™ piston gauges (deadweight testers), RPM™ reference pressure monitors, generation and control accessories and COMPASS® for PPC/RPM™ calibration software. Manufactures flow instrumentation: molbloc/molbox™ gas flow standards, molbox RFM™ reference flow monitor and COMPASS®for molbox™ calibration software. |
| Flow Technology , Inc. Phoenix, AZ Tel: 602-437-1315 Toll free: 800-528-4225 Fax: 602-437-4459 ftimarket@ftimeters www.ftimeters.com |
Manufacturers flow, pressure, time/frequency, temperature instrumentation, in particular Micro/Omnitrak Primary Standard Liquid Calibration Systems, Autobell Primary Standard Gas Calibration System, flow transfer standards, economical in-line calibration and proving systems, Calware Advanced Flow Calibration Software. Also provides calibration service for flow, pressure, time/frequency, and temperature. |
| Fluke Corporation Everett, WA/USA. Tel: 800-44-FLUKE Tel: 425-347-6100 Fax: 800-FLUKE-FAX Fax: 425-356-5116 info@tc.fluke.com www.fluke.com In Europe: Fluke Europe B.V. Eindhoven, The Netherlands. Tel: +31-40-2675-200 Fax: +31-4-2675-222 calibration_info@fluke.nl |
Accredited by NVLAP & DKD. Primary Standards Laboratory, Calibration Laboratory, Verification Laboratory. Manufactures reference standards for voltage, current, resistance, ratio. Manufactures multi-product calibrators, oscilloscope calibrators, meter calibrators and compact professional electronic test tools for electrical, frequency, pressure & temperature, calibration and lab management software. Provides calibration service for dimensional, mechanical, temperature, electrical, frequency, pressure and time instrumentation. Provides training seminars throughout year on lab management, calibration software, fundamentals of metrology. |
| Furness Controls Bexhill-on-Sea, United Kingdom Tel +44-1424 730 316 Fax +44 1424 730 317 c.rendle@furness-controls.com www.furness-controls.com |
Accredited by UKAS. Manufactures flow and pressure instrumentation including micromanometers, transmitters, transducers, gauge and absolute primary pressure standards, laminar flow elements, pitot tubes, pitot-static tubes, industrial leak detectors and flow meters. Also provides calibration service for flow and pressure. |
| Futek Advanced Sensor Technology Irvine, CA Tel: 949-465-0900 Fax: 949-465-0905 Toll free: 1-800-23-FUTEK www.futek.com |
Manufacturer and supplier of advanced load cells, force sensors, torque sensors, pressure sensors, signal conditioners, digital displays and portable sensor verficiation/calibration system utilizing strain gauge and thin film technologies. |
| MKS Instruments, Inc. Wilmington, MA Tel: 978-284-4000 Fax: 978-284-4999 mks@mksinst.com www.mksinst.com |
MKS Instruments, Inc. provides instruments and components that power, measure, control and monitor complex vacuum and gas-related manufacturing processes. Products and services include pressure/vacuum gauges, mass flow controllers, portable and bench-top pressure/vacuum and flow calibration systems, and complete calibration services directly traceable to NIST. |
| Sierra Instruments, Inc. Monterey, California Tel: 831-373-0200 Toll free: 800-866-0200 Fax: 831-373-4402 sales@sierrainstruments.com www.sierrainstruments.com |
Registered to ISO 9001. Manufactures flow instrumentation: Vortex Mass Flowmeters. |
| Futek Advanced Sensor Technology Irvine, CA Tel: 949-465-0900 Fax: 949-465-0905 Toll free: 1-800-23-FUTEK www.futek.com |
Manufacturer and supplier of advanced load cells, force sensors, torque sensors, pressure sensors, signal conditioners, digital displays and portable sensor verficiation/calibration system utilizing strain gauge and thin film technologies. |
| Morehouse Instruments Co. York, PA Tel: 717-843-0081 Fax: 717-846-4193 hzumbrun@mhforce.com www.mhforce.com |
Manufactures load cells, force gauges, proving rings, force measurement/calibration equipment. Accredited force calibration services through 1,000,000 lbf using deadweights through 120,000 lbf. |
| Sensor Developments, Inc. Orion, MI 48359 Tel: 248- 391-3000 Fax: 248-391-0107 sales@sendev.com www.sendev.com |
Sensor Developments Inc. designs and manufacturers strain gaged based force and torque sensors, instruments and complete test systems. Our products are used in a wide range of industries and applications, including automotive, aerospace, medical, nuclear, agricultural and many others. We provide ISO-17025 accredited calibrations for any force and torque sensors through our A2LA accredited calibration laboratory. Our ranges for torque are 1.2 to 360,000 in lb. Our ranges for force are 1 to 300,000 lb |
| Thames Side-Maywood Southwood, Farnborough England Tel: +44 (0) 1252 555811 Fax: +44 (0) 1252 375394 www.thames-side-maywood.com |
Load cells, force sensors and load cell solutions for weighing and force measurement. |
| AJT Equipment Ltd Tel +44 (0) 1384 482 848 Mob +44 (0) 7971 089 019 Fax +44 (0) 1384 482 849 AJTEquipment@aol.com www.ajt-testing.com |
AJT Equipment Ltd, UK, was founded in 1951 and have over sixty years combined experience in the manufacture and calibration of Tensile Testing Machines and Force Testing Machines. We design both Tensile Test Machines and Force Testing Machines to our customers specific requirements. We are the exclusive agent for the UK and Republic of Ireland for the sale, distribution and service of the United Calibration Corporation Universal Testing Machines, Data systems, Hardness Testers, Environmental chambers and related accessories. Therefore, together with our own large capacity Tensile Test Machines, Compression Test Machines, Force Testing Machines, Accuway loadcells, calibrations and test facilities, we are one of the most versatile Tensile Test Machines and Force Test Machines supplier in the United Kingdom. Our extensive range of Test Machinery has the scope to test samples as small as Single Strand Wire up to Marine Anchor Cable. We manufacture our own brand of Accuway Loadcells. Our highly trained engineers service, repair and calibrate all types of testing and weighing devices to National Standards both in-house and on-site nationally and internationally. Our in-house facilities enable us to calibrate and test equipment up to 100 Tonnes Tensile and 200 Tonnes Compression, and on-site up to 400 Tonnes Tension and 1000 Tonnes Compression. |
Humidity / Dewpoint / Hygrometers
| ASL, Inc Tel: 978-658-0000 Fax: 978-658-5444 aslinc@aslinc.com www.aslinc.com |
Full range of temperature measurement & calibration products including AC thermometry bridges & digital indicators, liquid calibration baths & metal blocks, standard platinum resistance thermometers & standard resistors. Also offers temperature products, humidity products, and calibration service. |
| Dickson Company Tel: 800-323-2448 Fax: 800-676-0498 dicksoncsr@dicksonweb.com www.dicksonweb.com |
Full line of data loggers, circular chart recorders, hand held instruments and software for monitoring and recording temperature, humidity, and pressure. Calibration services for any brand of temperature or temperature/humidity instruments. |
| Eastern Scientific Products Now a product line of GE Sensing |
Manufactures humidity calibrators Vaportron, Vaporpak, and Vaporsorp Systems. |
| E+E Elektronik GmbH Engerwitzdorf, Austria Tel: +43-7235-605-0 Fax: +43-7235-605-8 info@epluse.com www.epluse.com |
E+E Elektronik manufactures transmitters, sensors, hand-helds, data loggers and calibrators for measurement of relative humidity, moisture in oil, dew point, air velocity , CO2 and temperature. Furthermore E+E carries on an accredited-by-state calibration laboratory according to ISO/IEC 17025 and holds "Austria's National Standard for Humidity". Accredited Calibrations can be done for relative humidity, dew point, air velocity, CO2 and temperature. E+E is certified according to ISO TS16949 and ISO 9001. |
| EdgeTech Tel: 800-276-3729 Tel: 508-478-9500 Fax: 508/634-3010, h20@edgetech.com www.edgetech.com |
Manufactures moisture & humidity instruments, chilled mirror sensors, portable RH calibrator chambers, NIST traceable primary dew point hygrometers. Calibration services offered on any humidity instruments. |
| GE Sensing Tel: 800-225-3208 Fax: 781-938-1071 sensing@ge.com www.gesensing.com |
GE Sensing, through it's Ruska, Druck and General Eastern product lines, provides a wide array of pressure and moisture test and calibration instrumentation including primary and secondary standards. Select products are available with accredited calibrations. Additionally, parameters including pressure, moisture, temperature and electrical are available in a extensive line of portable and field calibration equipment. Calibration service is available for a wide variety of products in addition to repair services and training for company supplied products. |
| Humidity Systems, Inc. Grafton, MA Tel: 508-839-5185 Fax: 508-302-2657 info@humiditysystems.com www.humiditysystems.com |
Manufactures humidity/dew point instrumentation. Also provides calibration service for humidity and dew point. |
| Kahn Instruments, Inc. Wethersfield, Connecticutt Tel: 860-529-8643 Fax: 860-529-1895 info@kahn.com www.kahn.com |
Manufactures humidity instrumentation such as hygrometers, dewpoint transmitters, calibration systems. |
| Kaymont Consolidated Industries Huntington Station, NY Tel: 631-424-6459 Fax: 631-549-3076 pfetkow@optonline.net www.kaymont.com |
Manufactures humidity calibrators and generators. |
| Microconversion Technologies, Co. Brookings, SD. Tel: 605-692-3748 Fax: 605-697-5565, mctco@brookings.net www.serv.brookings.net/~mctco |
Manufactures Ultra DP5 Chilled surface dewpoint hygrometer. |
| Michell Instruments Ltd. Cambridge, United Kingdom Tel +44(0)1223 434 800 Fax +44(0)1223 434 895 info@michell.co.uk www.michell-instruments.com |
Accredited to ISO 17025 by UKAS, ISO 9002, ISO 9001:2000 certified. Manufacture dew-point hygrometers. Also calibration service for humidity. |
| Midwest Micro-Tek, LLC Brookings, South Dakota. Tel: 605-697-8521 Fax: 605-692-5112 mmt@midwestmicro-tek.com www.midwestmicro-tek.com |
Manufactures the Ultra DP5 Dewpoint Hygrometer, 8 and 16 bit microcontrollers and contract and custom design instrumentation for electrical, humidity and temperature. |
| Rotronic Instruments (UK) Ltd. Crowley, West Sussex United Kingdom Tel: 01293 571000 Fax: 01293 571008 instruments@rotronic.co.uk www.rotronic.co.uk |
Rotronic UK provide instruments such as humidity transmitters for measuring relative humidity, dew point, water activity and other humidity parameters. |
| Shinyei Tel: : 212-682 4610 Fax: 212-286 8426 kenmurray-shinyei@comcast.net www.shinyei.com |
Manufactures humidity standards-chilled mirror hygrometers, relative humidity sensors, humidity transmitters. Shinyei also offers calibration services for any brand of humidity instruments. |
| Thunder Scientific Tel: :505-265-8701 Fax: 505-266-6203 ThunderSci@aol.com www.ThunderScientific.com |
Accredited to Z540-1. Two-pressure NIST traceable humidity and dewpoint standards. Mobile benchtop ±0.5% RH standard frostpoint range -95 degree C to +10 degree C (automated with PC compatible software.) Also provides calibration services for humidity and dewpoint. |
| Vaisala Tel: 781-933-4500 Toll Free: 1-888-VAISALA (824-7252) Fax: 781-933-8029 incsales@vaisala.com www.vaisala.com |
A leader in environmental measurement develops, manufactures and markets a surface acoustic wave dew point transfer standard, RH transmitters for use from -40°C to 180°C, dew point transmitters for -60°C to +60°C dew point temperature, handheld for -50°C dew point and up to 300 psig, reference grade barometers for laboratory use, and much more. Visit our website for complete product information. |
| Veriteq Instruments, Inc. Richmond, BC Canada Tel: 800-683-8374 Fax: 604-273-2874 www.veriteq.com |
Veriteq Instruments is the leader in mission-critical temperature and humidity monitoring solutions. Thousands of customers in life sciences, US military, hospitals, logistics companies, electronics manufacturers and other industries repeatedly depend on Veriteq Instruments Inc. |
Magnetic Field and Magnetic Flux
| GMW Associates Tel: 650-802-8292 Fax: 650-802-8298 ian@gmw.com www.gmw.com |
Magnetic field and magnetic flux measurement instruments, current transducers for isolated electric current measurement. Also distributor for electrical test & measurment instrumentation. |
| Beamex, Inc Marietta, GA Tel: 800 888-989 Tel: 770-951-1927 Fax: 770-951-1928 info@beamex.com www.beamex.com In Europe: Beamex Oy Ab Pietarsaari FINLAND Tel +358 10 550 5000 Fax +358 10 550 5404 info@beamex.com www.beamex.com |
Beamex is a technology and service company that develops, manufactures and markets high-quality calibration equipment, software, systems and services for the calibration and maintenance of process instruments. The company is a leading worldwide provider of calibration solutions that meet even the most demanding requirements. |
| INSCO Metrology and Instrumentation Miami, FL. Tel: 305-994-8031 Tel: 877-542-4487 ext. 115 Fax: 305-994-7365 Fax: 787-765-5585, info@insco.us www.insco.us |
Distribute first class weight sets for ASTM 1, 2, 3, 4, 5 and F or OIML E1, E2, F1 and F2. Also Calibration Service Laboratory for mass and temperature. |
| Load Cell Central Tel: 1-570-265-5015 Toll Free: 800-LOADCEL (800-562-3235) Fax: 1-570-265-5148 http://800loadcel.com |
Manufacturers load cells and digital indicators for the weighing industry, and calibration kits for in-house calibration. |
| Mettler-Toledo, Inc. Columbus, Ohio. Tel: 614-438-4932 Fax: 614-438-4871 markus.beeler@mt.com www.mt.com/na |
Mass comparators, balances, analytical instruments for mass. |
| Rice Lake Weighing Systems Tel: 800 472-6703 Fax: 715-234-6967 prodinfo@rlws.com www.calweights.com |
Accredited by NVLAP for mass. Calibration Service for mass & calibration weights. Manufacturers scales, balances, calibration weights for scales & balances, cast iron, stainless steel weights, special design for size, dimension or weight, special customized weight kits. |
| Sartorius Corporation Tel: 631-254-4249 Fax: 631-2544253 abreisblatt@sartorius.com www.sartorius.com |
Accreditation to ISO 17025 pending. Registered ISO 9001. Manufactures mass comparators, scales and balances. |
| Transducer Techniques Tel: 909-719-3965 Tel: 800-344-3965 Fax: 909-719-3900 tti@ttloadcells.com www.transducertechniques.com |
Accredited to ISO/IEC 17025 by NVLAP for mass, pipettes, density and magnetic susceptibility. Accredited by UKAS for mass. Registered for ISO9000 and QS9000. Manufactures weights and mass standards. Also primary standards laboratory provides calibration service and verification services for temperature, thermal mass flow, mass, and pipettes. |
| AdvanTech Manufacturing New Berlin, WI Tel: 800-511-2096 Fax: 262-786-5074 sales@advantechmfg.com www.advantechmfg.com |
NIST traceable certification and calibration service on new and used test sieves - all sizes. Measurement data, statistics, and pass/fail information included. Manufacturers of brass and stainless steel Test Sieves, ARROW sieve shakers and L3P Sonic Sifter. |
| Assurance Technologies, Inc. Chicago, IL Tel: 630-231-4800 Fax: 630-231-8844 colleen@atiquality www.atiquality.com |
Accredited to ISO 17025. Wide range of dimensional, mechanical and optical instrumentation including optical & video comparators, optical & video inspection equipment, hand gages & tools, hardness testers, SPC hardware & software, and CMMs. Also provides calibration service for dimensional, mechanical equipment. |
| Optodyne, Inc. Compton, CA Tel: 800-766-3920 Tel: 310-635-7481 Fax: 310-635-6302 sales@optodyne.com www.optodyne.com |
Accredited to ISO 17025. Laser-based measurement and inspection equipment for precision machine tools and stages as well as displacement calibration. |
| PTC Metrology Tel: 310-478-1134 Fax: 310-312-0826 sales@ptc1.com www.ptcmetrology.com |
Accredited to ISO 17025. Manufacture products for temperature, such as surface thermometers, also polariscopes, hardness testers, durometers. Provide calibration service for temperature and durometers. |
| Renishaw, Inc. Hoffman Estate, IL Tel: 847-286-9953 Fax: 847-286-9974 usa@renishaw.com www.renishaw.com |
Registered ISO 9001. Manufacture equipment for dimensional, mechanical, optical, pressure, temperature, time/frequency including CMM products, digitizing systems, machine tool products, position encoders, raman spectroscopy and probes. |
| Velmex Bloomfield, NY Tel: 585-657-6151 Fax: 585-657-6153 www.velmex.com |
Manufactures and distributes precision manual and motor driven linear slides, X-Y elevating and rotary tables, computer controlled multi-axis UniSlide Assemblies for scanning, indexing and positioning. |
| DFM Lyngby, Denmark Tel +45-4593-1144 Fax +45-4593-1137 info@dfm.dtu.dk www.dfm.dtu.dk |
Manufactures products for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, pressure, electrolytic conductivity and calibration software. Also provides calibration service for mechanical, electrical, optical instruments. Accredited for mass, length, electricity, optical power. Primary Standards Laboratory. |
| Quartzlock UK Ltd. Tel 44 1803 862 062 Fax 01803 867 962 quartzlock@quartzlock.com www.quartzlock.com |
Manufactures active hydrogen masers, passive hydrogen masers, GPS disciplined rubidium, GPS disciplined OCXO-BVA rubidium atomic frequency standards frequency measurement & distribution systems. Also attenuation & phase measurement instrumentation. Calibration and verification services for microwave, frequency, and time. |
| Rohde & Schwarz Tel: 888-837-8771 info@RSA.rohde.schwarz.com www2.rohde-schwarz.com |
Rohde & Schwarz is one of the world's leading manufacturers of test and measurement equipment. We offer a single box signal generator and calibration solution as well as a complete range of signal and spectrum analyzers, signal generators, power meters and sensors. Contact us for more information. |
| Tegam Inc. Tel: 440-466-6100 Fax: 440-466-6110, sales@tegam.com www.tegam.com |
Manufactures modular oscilloscope calibration instruments, impedance measurement instruments, resistance measurement instruments and standards, AC standards and measurement instruments, handheld temperature & electrical test instruments, RF and microwave products (power calibration & attenuation measurement). |
| Assurance Technologies, Inc. Chicago, IL Tel: 630-231-4800 Fax: 630-231-8844 colleen@atiquality www.atiquality.com |
Accredited to ISO 17025. Wide range of dimensional, mechanical and optical instrumentation including optical & video comparators, optical & video inspection equipment, hand gages & tools, hardness testers, SPC hardware & software, and CMMs. Also provides calibration service for dimensional, mechanical equipment. |
| Assurance Technologies, Inc. Chicago, IL Tel: 630-231-4800 Fax: 630-231-8844 colleen@atiquality www.atiquality.com |
Manufacturing custom tailored complex systems for integrated, in-line, in-process, 100%, automated inspection. Industrial metrology for 100% quality control. Consultancy for metrology tasks in industrial applications. Integrating and deploying different measuring theories, such as optical, machine vision, eddy current, inductive, capacitive sensoring, X-ray, laser, mechanics, etc. Unique systems for specific metrology tasks. Delivering complex services containing mechanics, electronics, software, communication, statistics, implementation, launch, training, etc. for solving complex inspection tasks. |
| Optronic Laboratories Orlando, FL Tel: 407-422-3171 Fax: 407-648-5412 info@olinet.com www.olinet.com |
Manufacturer of light measurement instrumentation and calibration services, including spectroradiometers, radiometer/photometers, LED test and measurement systems, integrating spheres, and calibration standards. Primary standards laboratory. |
| Renishaw, Inc. Hoffman Estate, IL Tel: 847-286-9953 Fax: 847-286-9974 usa@renishaw.com www.renishaw.com |
Registered ISO 9001. Manufacture equipment for dimensional, mechanical, optical, pressure, temperature, time/frequency including CMM products, digitizing systems, machine tool products, position encoders, raman spectroscopy and probes. |
| Velmex Bloomfield, NY Tel: 585-657-6151 Fax: 585-657-6153 www.velmex.com |
Manufactures and distributes precision manual and motor driven linear slides, X-Y elevating and rotary tables, computer controlled multi-axis UniSlide Assemblies for scanning, indexing and positioning. |
| Lighthouse Worldwide Solutions Milpitas, CA (Worldwide locations on website) Tel: : 408-945-5905 Fax: 408-942-1032 usa@golighthouse.com www.golighthouse.com |
Manufactures aerosal particle counters, surface particle counters, liquid particle counters, amc monitoring equipment, minienvironmental control and environmental instruments, ultra pure water insruments. Also provides Contamination, Particulate, AMC, ESD monitoring and control solutions to many different industries including Semiconductor, Pharmaceutical, Data Storage, Biotechnology, and Defense, among others. Also provides calibration service. |
| Alicat Scientific Tel: 520-290-6060 Fax: 520-290-0109 spaTel:@alicatscientific.com www.alicatscientific.com |
Mass flow meters, mass flow controllers, volumetric flow meters and volumetric flow controllers and pressure gauges and pressure controllers. |
| Beamex, Inc Marietta, GA 3006 Tel: 800 888-989 Tel: 770-951-1927 Fax: 770-951-1928 info@beamex.com www.beamex.com In Europe: Beamex Oy Ab Pietarsaari FINLAND Tel +358 10 550 5000 Fax +358 10 550 5404 info@beamex.com www.beamex.com |
Beamex is a technology and service company that develops, manufactures and markets high-quality calibration equipment, software, systems and services for the calibration and maintenance of process instruments. The company is a leading worldwide provider of calibration solutions that meet even the most demanding requirements. |
| DFM Lyngby, Denmark Tel +45-4593-1144 Fax +45-4593-1137 info@dfm.dtu.dk www.dfm.dtu.dk |
Products for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, pressure, electrolytic conductivity and calibration software. Primary Standards Laboratory. Accredited for mass, length, electricity, optical power. Also provides calibration service for mechanical, electrical, optical instruments. |
| Dickson Company Tel: 800-323-2448 Fax: 800-676-0498 dicksoncsr@dicksonweb.com www.dicksonweb.com |
Full line of data loggers, circular chart recorders, hand held instruments and software for monitoring and recording temperature, humidity, and pressure. Calibration services for any brand of temperature or temperature/humidity instruments. |
| DH Budenberg (France) Aubervilliers, France Tel +33 1 48 39 83 00 Fax +33 1 48 33 65 90 |
Accredited to ISO/IEC 17025 by COFRAC, UKAS and DKD. Manufacture pressure instrumentation. Also, primary standards laboratory and verification for electrical, pressure, temperature. Offers training in pressure metrology. |
| DH Budenberg, Inc. (USA) San Marcos, TX Tel: 877-713-2733, 512-353-3133 Fax: 512-353-3106 sales@dh-budenberginc.com www.dh-budenberg.com |
Accredited to ISO/IEC 17025 by COFRAC, UKAS and DKD. Manufacture pressure instrumentation. Also, primary standards laboratory and verification for electrical, pressure, temperature. Offers training in pressure metrology. |
| DH Instruments Tel: 602-431-9100 Fax: 602-431-9559 mfoster@dhinstruments.com www.dhinstruments.com |
The DHI Calibration Laboratory is accredited to ISO/IEC 17025 and ANSI/NCSL Z540-1-1994 for both pressure and flow calibration by the American Association for Laboratory Accreditation (A2LA). The DHI Laboratory Quality Assurance program is also in audited compliance with applicable United States Nuclear Regulatory Commission (NRC) Standards and has been regularly audited and approved by NUPIC. Values and uncertainties reported are directly traceable to the United States National Institute of Standards and Technology (NIST) as well as to European and Japanese national standards. Manufactures pressure instrumentation: PPC™ pressure controller/calibrators, PG7000™ piston gauges (deadweight testers), RPM™ reference pressure monitors, generation and control accessories and COMPASS® for PPC/RPM™ calibration software. Manufactures flow instrumentation: molbloc/molbox™ gas flow standards, molbox RFM™ reference flow monitor and COMPASS®for molbox™ calibration software. |
| Flow Technology, Inc. Phoenix, AZ Tel: 602-437-1315 Toll free: 800-528-4225 Fax: 602-437-4459 ftimarket@ftimeters www.ftimeters.com |
Manufacturers flow, pressure, time/frequency, temperature instrumentation, in particular Micro/Omnitrak Primary Standard Liquid Calibration Systems, Autobell Primary Standard Gas Calibration System, flow transfer standards, economical in-line calibration and proving systems, Calware Advanced Flow Calibration Software. Also provides calibration service for flow, pressure, time/frequency, and temperature. |
| Fluke Corporation Everett, WA Tel: 800-44-FLUKE Tel: 425-347-6100 Fax: 800-FLUKE-FAX Fax: 425-356-5116 info@tc.fluke.com www.fluke.com In Europe: Fluke Europe B.V. Eindhoven, The Netherlands. Tel +31-40-2675-200 Fax +31-4-2675-222 calibration_info@fluke.nl |
Accredited by NVLAP & DKD. Primary Standards Laboratory, Calibration Laboratory, Verification Laboratory. Manufactures reference standards for voltage, current, resistance, ratio. Manufactures multi-product calibrators, oscilloscope calibrators, meter calibrators and compact professional electronic test tools for electrical, frequency, pressure & temperature, calibration and lab management software. Provides calibration service for dimensional, mechanical, temperature, electrical, frequency, pressure and time instrumentation. Provides training seminars throughout year on lab management, calibration software, fundamentals of metrology. |
| Furness Controls Bexhill-on-Sea, United Kingdom Tel +44-1424 730 316 Fax +44 1424 730 317 c.rendle@furness-controls.com www.furness-controls.com |
Accredited by UKAS. Manufactures flow and pressure instrumentation including micromanometers, transmitters, transducers, gauge and absolute primary pressure standards, laminar flow elements, pitot tubes, pitot-static tubes, industrial leak detectors and flow meters. Also provides calibration service for flow and pressure. |
| Futek Advanced Sensor Technology Irvine, CA Tel: 949-465-0900 Fax: 949-465-0905 Toll free: 1-800-23-FUTEK www.futek.com |
Manufacturer and supplier of advanced load cells, force sensors, torque sensors, pressure sensors, signal conditioners, digital displays and portable sensor verficiation/calibration system utilizing strain gauge and thin film technologies. |
| GE Sensing Located Houston, TX Tel: 713 975-0547 Fax: 713-975-6338 sensing@ge.com www.gesensing.com |
GE Sensing, through it's Ruska, Druck and General Eastern product lines, provides a wide array of pressure and moisture test and calibration instrumentation including primary and secondary standards. Select products are available with accredited calibrations. Additionally, parameters including pressure, moisture, temperature and electrical are available in a extensive line of portable and field calibration equipment. Calibration service is available for a wide variety of products in addition to repair services and training for company supplied products. The five day Pressure Metrology Seminar held at the Houston facility is now in it's 46th year. |
| Mensor Corporation San Marcos, TX Tel: 512-396-4200 Fax: 512-396-1820 sales@mensor.com www.mensor.com |
Manufactures pressure calibration systems, digital pressure gauges, digital pressure transducers, and field pressure standards. |
| MKS Instruments, Inc. Wilmington, MA Tel: 978-284-4000 Fax: 978-284-4999 mks@mksinst.com www.mksinst.com |
MKS Instruments, Inc. provides instruments and components that power, measure, control and monitor complex vacuum and gas-related manufacturing processes. Products and services include pressure/vacuum gauges, mass flow controllers, portable and bench-top pressure/vacuum and flow calibration systems, and complete calibration services directly traceable to NIST. |
| R&D Instrument Services Tamilnadu, INDIA Telefax: 91 44 22250126 sales@rndinstruments.com www.rndinstruments.com |
We design, fabricate, manufacture test benches, bench top units & set up complete instrumentation laboratory. We manufacture Dry Block type Temperature Calibrator (50 to 200 Deg C, 50 to 600 Deg C, 300 Deg C to 1,200 Deg C), precision Vacuum & Pressure Indicators / Calibrators ( - 1 Bar to 20 / 40 & up to 700 Bar.) |
| Renishaw,
Inc. Hoffman Estate, IL Tel: 847-286-9953 Fax: 847-286-9974 usa@renishaw.com www.renishaw.com |
Registered ISO 9001. Manufacture equipment for dimensional, mechanical, optical, pressure, temperature, time/frequency including CMM products, digitizing systems, machine tool products, position encoders, raman spectroscopy and probes. |
| Scandura & Fem S.r.l. Rodano Millepini, Italy Tel +39 02 95320021 Fax: +39 02 95328231 scandura@scandura.it www.scandura.it |
Scandura & Fem S.r.l., one of the most qualified and well-known companies in the field of instrument calibration and systems, is fully capable o offer the specific tailored sollutions and customized applications in: reference calibration laboratories, chemical laboratories, process instruments, field & workshop measuring instruments and systems, pressure and temperature generators, portable multifunction calibrators, control and safety valve testers, testers and simulators, calibration and maintenance equipment. |
| Schwien Engineering Inc. Pomona, CA Tel: 909-593-2535 . Fax: 909-593-8898 www.Schwien.com |
Manufacturer of the Super Schwien Manometer. Provides worldwide support, service and training on Schwien manometers; models FX & LX. |
| Total Temperature Instrumentation, Inc. Williston, VT Tel: 800-235-8367 Tel: 802-863-0085 Fax: 802-863-1193 sales@ttiglobal.com www.ttiglobal.com |
Manufacturer's exclusive US representative for temperature, pressure, process calibrators. Also provides calibration services for temperature, pressure, electrical. |
| Yokogawa Corporation of America Tel: 770-253-7000 Fax: 770-251-2088 lnfo@yca.com www.yca.com |
ISO 9000 registered. NIST traceable. Manufacture test and measurement, recorders, data acquisition, power analyzers, digital oscilloscopes, dataloggers, manometers, function generators, arbitrary generators, counters, DC voltage/current standards, thermometers, watt converter, DC source standard. Also provides calibration service. |
| Berkeley Nucleonics San Rafael, CA Tel: 415-453-9955 Fax: 415-453-9956 info@berkeleynucleonics.com www.berkeleynucleonics.com www.digitaldelaygenerators.com |
Berkeley Nucleonics Corporation is a leading manufacturer of precision electronics instrumentation for test, measurement and nuclear research. |
| Measurements International Tel: 315-393-1323 Fax: 315-393-1452 micanada@mintl.com www.mintl.com |
ISO 9000 certified. Automated primary electrical standards for DC metrology and AC power. Also provides calibration service for electrical. |
| Ohm Labs, Inc. Pittsburgh, PA Tel: 412.431.0640 Fax: 412.431.0649 www.ohm-labs.com |
Resistance standards, precision shunts, laboratory high voltage dividers. Developers of the SmartResistor and the temperature stabilized current shunt. A company focused solely on "Excellence in Resistance." |
| Oxford Instruments Tel +44-(0)-1223-627400 Fax +44-(0)-1223-625050 info.ri@oxinst.co.uk |
Quantized Hall primary resistance standards. Cryogenic electrical substitution absolute radiometer. |
| Geller MicroÅnalytical Laboratory, Inc. Topsfield, MA Tel 978 887-7000 Fax 978-887-6671 Jg@gellermicro.com www.gellermicro.com |
GellerAnalytical.pdf |
| VLSI Standards, Inc. Tel: 408-428-1800 Fax: 408-428-9555 www.vlsistd.com sales.support@vlsistd.com |
Accredited. Manufactures physical artifacts used to calibrate metrology instruments in the semiconductor and disk drive manufacturing industries. Our products include silicon dioxide film thickness standards, 200 mm resistivity standards, step height standards, absolute contamination standards and others. |
| AccuMetria Eugene, Oregon Tel: 541-687-9148 support@accumetria.com www.accumetria.com |
Provides off-line programming and simulation for Coordinate Measuring Machines. AccuMetria uses an inTel:ligent, metrology-based programming environment to easily create and edit CMM programs. Fully integrated into SolidWorks 2003, AccuMetria also provides CMM motion simulation complete with collision detection. |
| Alicat Scientific Tel: 520-290-6060 Fax: 520-290-0109 spaTel@alicatscientific.com www.alicatscientific.com |
Accredited. Manufactures products for flow, pressure and software. Products include mass flow meters, mass flow controllers, volumetric flow meters, volumetric flow controllers, liquid flow meters, liquid flow controllers, pressure controllers (both single and dual channel), pressure gages. Also manufactures software for flow, pressure. |
| American Quality Systems, Inc. Tel: 800-776-3090 Fax: 800-776-3096 sales@aqsinc.com www.aqsinc.com |
ProGAGE ISO v 5 Calibration Software, Procedure Pack Calibration procedures, calibration label kit. Also provide onsite set-up and training on ProGAGE ISO. |
| Beamex, Inc Marietta, GA Tel: 800 888-989 Tel: 770-951-1927 Fax: 770-951-1928 info@beamex.com www.beamex.com In Europe: Beamex Oy Ab Pietarsaari FINLAND Tel +358 10 550 5000 Fax +358 10 550 5404 info@beamex.com www.beamex.com |
Beamex is a technology and service company that develops, manufactures and markets high-quality calibration equipment, software, systems and services for the calibration and maintenance of process instruments. The company is a leading worldwide provider of calibration solutions that meet even the most demanding requirements. |
| Blue Mountain Quality Resources Tel: 814-234-2417 Fax: 814-234-7077 sales@coolblue.com www.coolblue.com |
For over 15 years, Blue Mountain Quality Resources has combined FDA and ISO requirements, industry experience, and best practices to develop a technologically advanced calibration management software application. The result, Calibration Manager*, is ideal for organizations looking for a complete and reliable solution for the management of regulated or highly controlled assets. |
| C.A. Motzko Tel: 650-595-8878 Fax: 650-595-1285, www.motzko.net. solutions@motzko.com |
Consulting on enterprise-wide equipment management and metrology. Equipment management software product with electronic T&M equipment catalog that cross references 40,000 root models. Provides barcode and normalization feature. |
| Caliso Software Tel +44 (0) 1908 675240, support@calisouk.com www.calisouk.com |
Calibration management software for scientists and engineers with ITS-90 and Callendar Van Dusen calculations, measurement uncertainties, calibration certificate design, e-mail support and much more. 46 Rockspray Grove, Walnut Tree, Milton Keynes, MK7 7EA, England. |
| CyberMetrics Corp Toll Free: 1-800-777-7020 (US and Canada) Tel: 480-922-7300 Fax: 480-922-7400 sales@cybermetrics.com www.cybermetrics.com |
Developers of GAGEtrak® Calibration Management System. Comprehensive and scalable. Runs on desktop, network, client/server, Palm computers and web. Complies with all domestic and international quality standards including ISO, ASTM and FDA. Free evaluation copy avaliable on-line or on CD. |
| Dalby Data Denmark Tel/Fax: +45 38 86 09 20 email@dalbydata.dk www.dalbydata.dk |
Calibration Management software, includes measurement conversion function. New Web Management Software. Free download of measurement unit conversion software from website. |
| DFM Lyngby, Denmark Tel +45-4593-1144 Fax +45-4593-1137 info@dfm.dtu.dk www.dfm.dtu.dk |
Accredited for mass, length, electricity, optical power. Primary Standards Laboratory. Manufactures products for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, pressure, electrolytic conductivity and calibration software. Also provides calibration service for mechanical, electrical, optical instruments. |
| Dickson Company Tel: 800-323-2448 Fax: 800-676-0498 dicksoncsr@dicksonweb.com http://www.dicksonweb.com |
Full line of data loggers, circular chart recorders, hand held instruments and software for monitoring and recording temperature, humidity, and pressure. Calibration services for any brand of temperature or temperature/humidity instruments. |
| Digital Metrology Solutions, Inc. Tel: 812-314-0043 Fax: 561-673-0586 www.digitalmetrology.com mcmalburg@digitalmetrology.com |
Custom dimensional and surface metrology software, training and consulting. Offers downloadable freeware on website. |
| Digitargos Ltd. Szigetmonostor, Hungary Tel +36 20 333-8279 Fax +36 26 593-009 office@digitargos.com www.digitargos.com |
Manufacturing custom tailored complex systems for integrated, in-line, in-process, 100%, automated inspection. Industrial metrology for 100% quality control. Consultancy for metrology tasks in industrial applications. Integrating and deploying different measuring theories, such as optical, machine vision, eddy current, inductive, capacitive sensoring, X-ray, laser, mechanics, etc. Unique systems for specific metrology tasks. Delivering complex services containing mechanics, electronics, software, communication, statistics, implementation, launch, training, etc. for solving complex inspection tasks. |
| Edison ESI: MudCats Westminster, CA Tel: 714-895-0440 Fax: 714-895-0381 info@edisonmudcats.com www.edisonmudcats.com |
MudCats is a comprehensive software solution that can improve performance on your lab's key business and calibration processes. MudCats-LIMS offers superb lab/asset management tools, including workload balancing, integrated email tools (recall), paperless operation, and more. On the bench, MudCats-CPM offers a broad range of calibration solutions from automating EMU and TAR/TUR calculations to complete GPIB & RS-232 instrument automation. MudCats-SpecTrack manages and employs instrument specifications for lab standards and other instrumentation. The MudCats Metrology Software Suite was developed in support of the Edison ESI Metrology lab. It is designed with the flexibility to meet the requirements of a diverse, internal, and third-party calibration workload, while enhancing operational excellence. |
| Electronic Test and Development Centre etdccn@md3.vsnl.net.in www.etdc-cn.com |
Accredited to NABL and ISO Guide 25/EN450001. Government of India organization set up under the Standardization, Testing and Quality Certification STQC) Directorate. Developed CALINT 98 software for automatic calibration interval per NCSL RP-1. |
| Flow Technology, Inc. Phoenix, AZ Tel: 602-437-1315 Toll free: 800-528-4225 Fax: 602-437-4459 ftimarket@ftimeters www.ftimeters.com |
Accredited by NVLAP & DKD. Primary Standards Laboratory, Calibration Laboratory, Verification Laboratory. Manufactures reference standards for voltage, current, resistance, ratio. Manufactures multi-product calibrators, oscilloscope calibrators, meter calibrators and compact professional electronic test tools for electrical, frequency, pressure & temperature, calibration and lab management software. Provides calibration service for dimensional, mechanical, temperature, electrical, frequency, pressure and time instrumentation. Provides training seminars throughout year on lab management, calibration software, fundamentals of metrology. |
| Honeywell Loveland Tel: 970-204-1454 Fax: 970-204-1513 www.iac.honeywell.com/services/loveland/ Customersupportloveland@honeywell.com |
Manufacturers of DocuMint*, automated calibration management system solutions for test, inspection and documentation of plant instrumentation and assets for all industry. Windows* 95, 98, and NT. |
| Indysoft Corporation Tel: 864-627-8858 www.indysoft.com sales@indy-soft.com |
Enterprise quality gage calibration and management software solutions for a wide range of database platforms. Evaluation software available upon request. |
| Integrated Sciences Group Tel: 661-872-1683 Fax: 661-872-3669 isg@isgmax.com www.isgmax.com |
Manufactures uncertainty analysis software (Uncertainty Analyzer); measurement decision risk analysis software (AccuracyRatio); SPC software (SPCView); calibration interval analysis software (IntervalMAX); petroleum technology management software (SteamTools, ResHeat). Also provides interval analysis services (ISG Interval Service); measurement technology R&D; analytical metrology consulting; metrology software system design.Integrated Sciences Group has developed free metrology software tools for controlling uncertainties and risks. These metrology freeware tools can be downloaded by visiting www.isgmax.com/freeware.htm. |
| JBL Systems Tel: 586-677-6700 www.jblsys.com |
Manufacture gage and instrument calibration software. |
| JTI Systems, Inc. Tel: 800-275-2544 Fax: 505-896-2525 jti@rt66.com www.jtipmap.com |
PMAP (TM) Software for determining and controlling measurement uncertainty, maintaining and determining calibration intervals, and real time control charting. |
| Labtronics, Inc. Tel: 519 767-1061 Fax: 519 836-4431 sales@labtronics.com www.labtronics.com |
Manufacturer of laboratory software for automated pipette calibration. |
| Mindready Solutions, Inc. Quebec, Canada Tel: 514-339-1394 Fax: 514-339-1376 www.mindready.com |
Software for industrial test in x-ray, in-circuit, functional and environmental testing for design, development and integration of complete test stations. |
| Newton Metrology Ltd. Jerusalem, Israel www.newtonmetrology.com |
Custom and off-the-shelf software including Evaluator math and uncertainty calculator, Predictor recalibration interval estimator, MetroCom COM DLL, and MetroVal uncertainty softare that combines Evaluator and Predictor. Also provides consulting services on ISO 17025, validation and measurement uncertainty, development of measurement systems, development of time scales, and establishment and maintenance of traceable metrological measurement standards. |
| Norvada LLC Seattle, WA Tel: 206-957-4530 Fax: 206-957-4508 sales@norvadallc.com www.norvadallc.com |
Developers of Calworks - the 100% web-based calibration management Software that can easily support 1 or 1000 labs. Free on-line evaluation system. |
| On Time Support Fax: 281-465-9478 sales@ontimesupport www.ontimesupport.com |
Enables metrology labs to realize greater efficiency, productivity and accuracy by providing high quality software and support services. Tel: 281-296-6066 |
| Prime Technologies Tel: 610-436-9703 Fax: 610-436-9097 AMiller@primetechpa.com www.primetechpa.com |
ProCalV5 is a robust calibration management software solution available in scalable settings from a single user stand alone application to a multi-site enterprise wide software package. Its sophisticated architecture and design enables the program to be easily used, which in turn will help to improve your organizations calibration program from start to finish. Solutions are available to manage instrument calibration, compliance, reporting and much more. |
| RSoft Design Group, Inc. Ossining, NY Tel: 914-923-2164 Fax: 914-923-2169 info@rsoftdesign.com www.rsoftdesign.com |
RSoft Design Group, Inc. offers a comprehensive suite of design and business analysis software solutions to the Tel:ecommunications, semiconductor, and photonics industries. RSoft Design Group is the only company that provides a full range of simulation and analysis software for optical metrology applications utilizing the DiffractMOD and FullWAVE software tools. |
| SanSueB Software Kent, Washington Tel: 253-631-8846 sales@sansueb.com www.sansueb.com |
Internet products for manufacturers and calibration laboratories. Includes iPortal, iDocManager, iContent, iCalendar, and iMGT in the SanSueB Integrated Web Product Suite. Also internet software consulting and services. |
| Swag S.L. Montornes del Valles (Barcelona), Spain Tel +93 572 27 46/ +93 840 53 73 Fax +93 840 53 74 info@swaglab.com www.swaglab.com |
Develop computing applications for laboratories: metrological confirmation, LIMS, MSDS, management, quality assurance, etc. |
| TrackPro Tel: 305-829-3437 alw@trackpro.org www.trackpro.org |
TrackPro is a program that allows you to track the status of recurrent items such as calibrations, maintenance, validations and reminders. This program is free when used for tracking less than 150 items. |
| VeeCal Software San Lorenzo, CA Tel: 510-755-4579 sales@veecal.com www.veecal.com |
Calibration procedure software for 483 instruments from DC to microwave. Free offer to download procedures for the HP 34401A as a sample at www.veecal.com/signin.asp. |
| Ametek Tel: 813 536-7831 Fax: 813-539-6882 www.ametek.com |
Manufacturer of Deadweight Testers, Dry-Block Temperature Calibrators. Also provides calibration service. |
| Andeen-Hagerling Tel: 216-349-0370 Fax: 216-349-0359 www.andeen-hagerling.com |
Ultra-high precision capacitance bridges & standards for electrical, pressure, temperature and thermal expansion measurement. |
| >ASL, Inc. Tel: 978-658-0000 Fax: 978-658-5444 aslinc@aslinc.com www.aslinc.com |
Full range of temperature measurement & calibration products including AC thermometry bridges & digital indicators, liquid calibration baths & metal blocks, standard platinum resistance thermometers & standard resistors. Also offers temperature products, humidity products, and calibration service. |
| Beamex, Inc Marietta, GA Tel: 800 888-989 Tel: 770-951-1927 Fax: 770-951-1928 info@beamex.com www.beamex.com In Europe: Beamex Oy Ab Pietarsaari FINLAND Tel +358 10 550 5000 Fax +358 10 550 5404 info@beamex.com www.beamex.com |
Beamex is a technology and service company that develops, manufactures and markets high-quality calibration equipment, software, systems and services for the calibration and maintenance of process instruments. The company is a leading worldwide provider of calibration solutions that meet even the most demanding requirements. |
| Cox Instrument Bensalem, PA. Tel: 215-639-0900 Fax: 215-639-1597 www.cox-instrument.com |
Manufactures electrical, flow and temperature equipment: flow meters, flow computers, totalizers, rate meters, hydrometers, flow straighteners, calibrators, test stands, flow manifold systems. Also provide calibration service and verification for electrical and flow equipment. Accredited to ANSI/NCSL Z540-1-1994, ISO Guide 25; certified to ISO 9001:2000, ISO 10012:1. |
| DFM Lyngby, Denmark Tel +45-4593-1144 Fax +45-4593-1137 info@dfm.dtu.dk www.dfm.dtu.dk |
Accredited for mass, length, electricity, optical power. Primary Standards Laboratory. Manufactures products for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, pressure, electrolytic conductivity and calibration software. Also provides calibration service for mechanical, electrical, optical instruments. |
| Dickson Company Tel: 800-323-2448 Fax: 800-676-0498 dicksoncsr@dicksonweb.com www.dicksonweb.com |
Full line of data loggers, circular chart recorders, hand held instruments and software for monitoring and recording temperature, humidity, and pressure. Calibration services for any brand of temperature or temperature/humidity instruments. |
| Electronic Development Labs, Inc. (EDL) Danville, VA Tel: 434-799-0807 Fax: 434-799-0847 sales@edl-inc.com www.edl-inc.com |
Manufacturer of temperature calibrators, dry block, black body, stirred liquid bath. EDL temperature calibration equipment is unique since NO PROPRIETARY ELECTRONICS is involved. We employ standard Eurotherm controllers without sacrificing the accuracy of a control system. The CLONE FILES are supplied with our calibration equipment |