Job Openings/Job Seekers
Job Openings listings are $50 for three months. Job Seekers listings (resume postings) are free. To have your job opening or job seeker listing posted, email your listing to us or for further information contact us. Newest job listings are at the top.
Job Openings
Electronic Technician -- 6/12/09
Rohmann Services, Inc.
Andrews AFB, MD
JOB DESCRIPTION
Position Summary: Performs the calibration and repair of TMDE under the guidance of the AFMETCAL program. Calibrations will be traceable to the USAF primary standards laboratory. The technician will use PAMS for recording standards used and other information used during the calibration.
JOB REQUIREMENTS
Qualified candidates will have experience in the following areas depending on the position and level:
COMPANY OVERVIEW
Rohmann Services, Inc. is a small diverse company that was founded and incorporated the State of Texas - 1982. We meet the qualifications of a Small Business as specified by the United States Small Business Administration. RSI maintains a Top Secret Facility Clearance granted by the Defense Security Service. Government contracting is our business and we pride ourselves on our exemplary performance record. Each member of our corporate management has served as a member of the Armed Services or had direct affiliation.
Our contracts include:
Benefits: Medical, Dental, Life Insurance and 401k.
Send your resume to brent@rsinsa.com.
Standards Laboratory Supervisor -- 6/9/09
Energy Northwest
Richland, WA
Energy Northwest has been a leading power supplier to the Northwest public power community for 50 years. Headquartered just north of Richland, Washington, we provide electricity, at cost, to public power utilities and municipalities. Our staff represents a broad range of professions, from electricians to project managers, nuclear operators to accountants, and pipe fitters to engineers.
GENERAL SUMMARY
Directly responsible for providing leadership, supervision, and technical direction of bargaining unit staff to provide comprehensive calibration services of measurement and test equipment (M&TE). Responsibilities also include review/approval of technical documents related to the work flow including but not limited to Calibration Reports, Out of Tolerance Reports, Procurement Transactions, Requisitions, Non Conformance Reports, Certifications, etc., and regular interface with customers regarding quality and operational issues. Provide input to the manager on budget, schedule, staffing, and system long-term planning, and work involvement to support the operation of Calibration Services. Serve as primary delegate for the Calibration Services Manager.
REQUIRED EDUCATION & EXPERIENCE
Associate's degree from an accredited college or university OR 2-year trade school OR the equivalent such as military training in the instrument and control or metrology fields, and 8 years experience in maintenance, I&C or metrology field. Experience must include demonstrated leadership and planning capabilities as would normally be obtained in a lead or shop engineer role or similar job function and 5 years in a multi-disciplined Standards Laboratory performing calibration in the following disciplines: pressure, vacuum, flow, mass, torque, force, dimensional, temperature, humidity, radiological, electrical, electronic, light, sound, vibration. High school diploma or GED is required.
Please apply at www.energy-northwest.com
Electronic Metrology Technician -- 5/13/09
Newark
Hendersonville, TN
Newark, a subsidiary of global distributor Premier Farnell plc (LSE:PFL), is the leading small-quantity distributor of electronic components and test equipment in the Americas, and its #1 source for RoHS compliant parts, services and information.
In addition to offering the broadest electronics selection from 440+ top manufacturers for same-day shipping, Newark provides a unique range of value-added services at no extra cost.
With multiple sales channels, customers do business with Newark through contact centers, local branch network in the US, Canada , Mexico and Brazil, a dedicated field sales force and a world-class website at www.newark.com. The holder of a General Services Administration schedule (GS-06F-0044M), Newark also supports federal government customers.
EXCITING OPPORTUNITY FOR YOU TO JOIN OUR TEAM!
Newark is looking for an Electronic Metrology Technician.
Job Purpose:
POSITION RESPONSIBILITIES:
POSITION REQUIREMENTS:
Apply Online at:
At Newark, our priority is our people. Our people put us here through their hard work and dedication. We offer a competitive salary and benefits package, which includes PPO, Consumer Driven Healthcare, Vision, Dental, STD, LTD, Life Insurance, retirement plans and much more.
BENEFITS ARE AVAILABLE ON YOUR FIRST DAY OF EMPLOYMENT!
At Newark, we value a diverse environment. We are an Equal Opportunity Employer.
Sorry, no relocation assistance or visa sponsorship available with this position.
Calibration Technician -- 4/15/09
Pharmaceutical Calibrations and Instrumentation, LLC (PCI)
Raleigh, NC
Pharmaceutical Calibrations and Instrumentation, LLC (PCI) is a nationwide leader in providing calibration and calibration-related services for pharmaceutical, biotechnology, and medical device manufacturers. Our services cover a full range of calibration needs such as On-site Process and Analytical Calibration, Metrology Laboratory Calibration Services, Consulting, and Instrumentation Sales and Rentals. This is a non-exempt position.
Job Description
PCI is seeking calibration technicians for its Process Calibrations team in Raleigh, NC. The Calibration Technician is responsible for calibration, installation and troubleshooting process instrumentation in pharma/biotech facilities. Instrumentation include temperature, pressure, level, flow, humidity, weighing, electronic devices and more. Calibration technicians also must prepare written documentation per GMP guidelines and follow standard operating procedures. You can find out more about PCI at www.pci-llc.com.
Job Requirements
Previous calibration, metrology or instrumentation and controls experience, a two-year associates degree in Engineering, Electronics, or related technical field (or equivalent military training such as PMEL, TMDE, 2P0X1). Climbing stairs, climbing on equipment such as tanks. Clean driving record.
Job Benefits
Send Resume to jobs@pci-llc.com
CALIBRATION / METROLOGY POSITIONS -- 3/27/09
Sypris Test & Measurement
CALIBRATION / METROLOGY POSITIONS
COMPETITIVE SALARIES
About the Company:
Sypris Test & Measurement is a leading provider of electronics products and services to the high tech electronics industry. Sypris T&M's Calibration Division is the premier provider of calibration, repair and metrology management solutions (one of our core competencies) in the nation. We provide these solutions to some of the world's largest companies.
Sypris Test & Measurement, Inc. has consistently been named to the
“Top 100 Companies for Working Families.”
Come join our team!
Please visit our website at www.sypris.com/stm/ for more information on Sypris Test & Measurement and go to https://sypris.tms.hrdepartment.com to apply.
HOT Career Opportunities:
We have current openings for experienced Calibration / Metrology / Technicians at different levels.
We are looking for experienced calibration and repair technicians. In this position you will be a part of a team representing Sypris Test & Measurement by providing customer service and technical expertise to meet our customer’s requirements. We invest in your personal and professional growth by providing you with education and training opportunities to keep current in your field. The work environment is fast-paced and high-energy. Help Sypris Test and Measurement be a leader in the Calibration industry by joining our team!
Position Summary:
Performs routine and complex work related to the repair and calibration of test, measurement and diagnostic equipment. Provides maintenance on equipment, when required. Uses calibration procedures and measurement systems for use on customer equipment in compliance with requirements. Assures compliance to Quality System.
Qualified candidates will meet the following requirements depending on position level: See job postings for specific requirements.
Sypris Test and Measurement offers an attractive compensation and benefits package including health, dental, vision, life, disability, and 401(k).
Our Health and Dental packages cover you beginning on your first day of employment provided you enroll within 30 days of your start date.
*Sypris Test and Measurement is proud to be an Equal Opportunity Employer. M/F/D/V strongly encouraged to apply. Employment contingent upon successful completion of 10-year criminal background investigation, pre-employment drug screening, clean driving record (no moving violations within the last 3 years), and reference checks. No faxes or phone calls please.
Calibration/PMEL Technicians -- 3/9/09
Rohmann Services, Inc. (RSI)
Various positions throughout the U.S.
Rohmann Services, Inc. (RSI) is a growing small diverse company that was established in Texas - 1982. Science and Management Resources, Inc. (SMR) is a Service Disabled Veteran Owned Small Business located in Pensacola, FL. Together we have formed a dynamic PMEL Management Team. Our Team provides services for government contracts and we are looking for experienced candidates in the metrology field to fill openings at several sites throughout the U.S. Positions include:
Qualified candidates will meet the following requirements:
Qualified candidates will have experience in the following areas depending on the position and level:
Benefits:
Our site locations are: Andrews AFB, MD; Dover AFB, DE, Scott AFB, IL and Johnson Space Center, TX. Interested candidates are to send their resumes to Brent Watling at rsinsabew@satx.rr.com or Sheree Riffenburg at sriffenburg@smrpcola.com.
Rohmann Services, Inc. and Science and Management Resources, Inc. are Equal Opportunity Employers.
RF / Microwave Calibration Technician -- 1/2/09
Davis Calibration
Andover, MA
Davis Calibration - a multi-state business-to-business sales and calibration services organization, is seeking an "experienced" RF / Microwave Calibration Technician to work in our customer location in Andover, MA. Our ISO 9002 and ISO17025 certified Calibration Laboratory serves hundreds of manufacturing organizations.
Description of Principal Duties and Accountabilities:
Required Qualifications:
Qualifications Preferred:
| Davis Calibration offers qualified applicants a dynamic working environment that will keep your career in motion. Our organization provides additional on-site exposure to other specialties that will increase skill level for advancement opportunities! | ||
| ~Competitive Wages | ~Comprehensive Benefit Package | ~410(K) Options |
Please respond with qualifications & salary history to:
cmooney@daviscalibration.com
EOE M/F/H/V
Calibration Technician -- 1/09
Calibration Consultants, Inc.
San Diego, CA
Reply to: contactus@calibrationconsultants.com
*Looking to fill multiple Junior and Senior level positions as soon as possible*
Calibration equipment experience a PLUS and preferred but not required in pharmaceutical or biotech environment.
Calibration Consultants customer base includes some of the largest Bio Pharmaceutical firm's in San Diego and the nation. Calibration Consultants is ISO/IEC 17025:2005 certified and is a leading calibration company in the southern California region. We have a family type atmosphere with many company activities. For additional information please visit the Company's web site at www.calibrationconsultants.com.
Job Purpose: The purpose of the position is to provide full time calibration services to a large Pharmaceutical plant in the northern San Diego area. Calibration equipment experience a plus.
Job Scope: The Technician will provide calibration services to the onsite Calibration Department.
Job Duties:
Knowledge, Skills, Experience, and Education required:
Calibration Consultants provides the following:
Please send your resume to contactus@calibrationconsultants.com
Calibration Technician -- 1/09
Milwaukee, WI
Precision Metrology, Inc.
Precision Metrology, Inc. is one of the largest, privately owned, calibration facilities in the nation, providing calibration services to a wide variety of sectors. Precision Metrology is accredited to ISO/IEC 17025 through A2LA and is registered to ISO9001:2000.
We are currently looking for calibration technicians at our Milwaukee facility. We are looking for calibration technicians in the areas of torque, force, pressure, and mass. Computer skills are required. Some travel involved. Competitive wages.
Submit resume to:
Precision Metrology, Inc.
Attn: Carol Shipley
7350 N. Teutonia Ave.
Milwaukee, WI 53209
Calibration Technician -- 1/09
Dade City, FL
Precision Metrology, Inc.
Precision Metrology, Inc. is one of the largest, privately owned, calibration facilities in the nation, located in Milwaukee, WI and Dade City, FL, providing calibration services to a wide variety of sectors. Precision Metrology is accredited to ISO/IEC 17025 through A2LA and is registered to ISO9001:2000.
We are currently looking for a calibration technician at our Dade City, FL facility. We are looking for a calibration technician competent in physical/dimensional calibrations. Capability in the calibration and repair of hand tools, hard-gaging, torque and force instruments, surface plates and CMM's is a plus. Some travel involved. Very competitive wages.
Submit resume to:
Precision Metrology, Inc.
Attn: Carol Shipley
7350 N. Teutonia Ave.
Milwaukee, WI 53209
Technical Sales Engineer -- 1/09
GCS Calibration Services
Lake Mary, Florida
Gulf Calibration Services (GCS), an Accredited Primary Standards Calibration Laboratory and Standards and electrical measuring equipment distributor located in Lake Mary, Florida seeks an experienced Technical Sales Engineer. Product lines include Resistance Standards, Voltage Standards, Current Shunts, Decade Boxes, Temperature Baths, Multi-Product Calibrators, Time & Frequency Standards, and other precision instruments. GCS provides accredited calibration services for AC & DC Voltage and Current, Resistance, Capacitance, Frequency, and Temperature. Other services include Pressure, Torque and Salinity.
Job Responsibilities:
Job Skills and Qualifications:
Requirements:
Email resumes to: sales@gcscalibration.com or fax to 407-333-3309
Physical/Dimensional Repair and Calibration Technicians -- 1/09
Instrument Repair & Calibration, Inc.
Houston, Texas
Instrument Repair & Calibration, Inc., located in Houston, Texas, provides electronic and physical dimensional repair, calibration and certification services on test, measurement and calibration instrumentation.
We are currently seeking full time Physical/Dimensional Repair and Calibration Technicians. In this position you will repair, calibrate and certify calipers, comparators, dead weight testers, gages, gage blocks, levels, micrometers, rings, scales, surface plates, torque wrenches and many other types of physical, dimensional, and pressure instruments.
We have the latest and most accurate standards in the industry. Our FRIDA software system allows our technicians to quickly add and track all assets, document calibration findings, and print certificates.
We are a growth company where employees enjoy a progressive work environment with competitive salaries, career advancement and excellent benefits. The pay for this position is between $17.00 and $20.00 per hour.
Qualified candidates must have a clean driving record (no moving violation within the last 3 years) and a valid drivers license. A criminal background check and drug test is required.
Please email your resume to Craig Morris. The email address is craig.morris@instrumentservices.com.
Metrology Technician II -- 12/10/08
MedImmune
Frederick, MD
“My company shares my
passion for helping to improve
human health around the world.”
“This is My MedImmune.”
Those who join MedImmune feel a sense of ownership about their future. They thrive with a recognized leader in the biotechnology industry and the wholly-owned subsidiary of AstraZeneca plc.
Here, you will join passionate professionals who advance science, technology and medicine to develop products designed to help people live better lives. You will excel in an environment characterized by respect, integrity and growth opportunities... that encourages both individual contribution and collaborative entrepreneurial thinking. Our products and/or product candidates are designed to address areas of need in infection, oncology, respiratory disease and inflammation, cardiovascular/gastrointestinal disease and neuroscience. Explore a MedImmune career as we strive to better more lives, more often, around the world.
Title: Metrology Technician II
Location: Frederick, MD
Req: 01239
Essential Job Functions:
•Implement and perform the calibration program in accordance with established SOPs.
•Coordinate and perform the scheduling of all testing to minimize disruptions to departments.
•Coordinate the operation and maintenance of calibration and test equipment.
•Coordinate calibration technicians and contractors.
•Contribute to the preparation and maintenance of the calibration budget.
•Perform day-to-day calibration testing by following established SOPs.
•Operate and maintain a variety of calibration and test equipment such as: temperature measurement devices, pressure measurement devices, phototachometers, current loop devices, and flow rate equipment.
•Write Metrology SOPs for individual instruments.
•Operate various manufacturing equipment, and programmable logic controllers (PLCs) according to established SOPs in order to obtain data for the performance of calibration testing.
•Capability of troubleshooting, repair and adjustment of equipment used in manufacturing.
•Communicate effectively with supervisor and other departments work load, priorities and issues to maintain the Calibration Schedule.
Associates: Science Related
If you are interested in this position please —
APPLY ONLINE at www.medimmune.com/careers and search for Req. 01239
MedImmune is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, or any other characteristic protected by federal, state or local law.
Managing Director – USA & Canada -- 11/21/08
EasyMetric
Chicago, IL
MANAGING DIRECTOR – USA & Canada
We are looking for a high-energy, independent sales, marketing and business development professional to lead EasyMetric's entry into the US and Canadian markets. This person will report directly to the CEO based in Europe, and will be responsible to build, manage and develop the US office. Responsibilities will include market analysis, customer targeting, developing and maintaining customer relationships, negotiating and winning new business resulting in new strategic accounts.
This opportunity will allow high visibility and career growth, since this is the first entry into this important new market for EasyMetric.
The ideal candidate will have B2B and B2C sales experience, knowledge of technical product management and marketing, and a familiarity with Metrologic engineering markets. Fluency in French and English is preferred but not necessary, with additional language ability desirable. Experience working for foreign multinational companies is preferred as well as in managing small business units.
This position is located in Chicago.
Skills
Technical / Engineering background or ability to represent technical products
Knowledge of US and Canadian industrial markets
Market analysis and customer identification skills
Excellent relationship management
Outstanding written and verbal communication skills
Exceptional business acumen and ethics
Please send your résumé and cover letter to:
Thierry Crépin
Embassy of France in the United States
Economic Department - Chicago/Detroit
Thierry.crepin@missioneco.org
Technical Sales Engineer -- 11/11/08
TekNet Electronics
TekNet Electronics and corporate partners OpLink Solutions and Instrument Calibration Service are actively recruiting additional talent in the discipline listed below. We welcome your interest in our growing organizations, and invite you to submit your qualifications for consideration.
Technical Sales Engineer
As one of our global inside sales representatives, you will be part of a customer service team focused on maximizing sales through the development of new business and servicing existing customers in your territory.
Position Requirements –
Duties and Responsibilities –
Compensation –
Our benefits package includes: medical, dental, vision, short-term and long-term disability plans, life insurance, flexible time off, and a 401(k) plan with company matching.
Hiring is contingent upon the successful completion of background checks for criminal and credit histories.
Contact TekNet regarding these career opportunities via email at careers@teknet.com. Please, no direct calls.
Electronic Repair Engineer -- 11/11/08
OpLink Solutions
OpLink Solutions and corporate partners TekNet Electronics and Instrument Calibration Service are actively recruiting additional talent in the discipline listed below. We welcome your interest in our growing organizations, and invite you to submit your qualifications for consideration.
Electronic Repair Engineer –
Position Requirements –
Duties and Responsibilities –
Ideal candidate is proficient in troubleshooting and repair to the component level in both legacy and current model Agilent / Hewlett Packard, Tektronix, Fluke, Rohde & Schwarz, Anritsu, and Advantest test equipment.
Our benefits package includes: medical, dental, vision, short-term and long-term disability plans, life insurance, flexible time off, and a 401(k) plan with company matching.
Hiring is contingent upon the successful completion of background checks for criminal and credit histories.
Contact OpLink regarding career opportunities via email at careers@oplinksolutions.com. Please, no direct calls.
Calibration Specialist -- 11/11/08
Instrument Calibration Service
Instrument Calibration Service (ICSI) and corporate partners OpLink Solutions and TekNet Electronics are actively recruiting additional talent in the discipline listed below. We welcome your interest in our growing organizations, and invite you to submit your qualifications for consideration.
Calibration Specialist –
Position Requirements –
Duties and Responsibilities –
Our benefits package includes: medical, dental, vision, short-term and long-term disability plans, life insurance, flexible time off, and a 401(k) plan with company matching.
Hiring is contingent upon the successful completion of background checks for criminal and credit histories.
Contact ICSI regarding career opportunities via email at careers@instrumentcalibration.com. Please, no direct calls.
Career Openings-- 10/22/08
Davis Calibration - Serving Industry Since 1912
Davis Calibration is a worldwide leader in the calibration, repair and certification of Test, Measurement and Control Instruments. Through decades of experience in the instrumentation field, we have developed innovative technological expertise in providing service and support for business and industry. Since 1912, Davis Calibration Labs have proudly provided an evolving array of support services for test, measurement and control instrumentation. As technological demands have increased, so have our capabilities. We are an ISO 9002 certified Calibration Laboratory. Exciting career opportunities are available. You can log onto www.daviscalibration.com and view career openings in one of our 28 calibration laboratories throughout the United States.
Description of Principal Duties and Accountabilities:
Davis Calibration offers qualified applicants a dynamic working environment that will keep your career in motion. Our organization provides additional on-site exposure to other specialties that will increase skill level for advancement opportunities!
~ COMPETITIVE WAGES ~ COMPREHENSIVE BENEFIT PACKAGE ~ 401(K) OPTIONS
Please respond with qualifications & salary history to Michele Boeri, mboeri@daviscalibration.com
EOE M/F/H/V
Calibration Technician -- 8/18/08
ITT Power Solutions
West Springfield, MA
General:
Supports the strategic plan's goals and objectives. Calibrates inspection, measuring and test equipment in accordance with established procedures, techniques and contractual obligations. Support and enhance the strategic plan's goals and objectives.
Duties and Responsibilities:
Qualifications Requirements:
The requirements listed below are representative of the knowledge, skill and/or ability required to perform the essential functions of this position.
Fax resumes to 413-263-6268 or to apply in person visit ITT Power Solutions, 11 Interstate Drive, West Springfield, MA 01089
Electronic Repair and Calibration Technicians -- 8/5/08
Instrument Repair & Calibration, Inc.
Houston, Texas
Instrument Repair & Calibration, Inc., located in Houston, Texas, provides electronic, electrical, and physical/dimensional repair, calibration, and certification services on test, measurement and calibration instrumentation.
We are currently seeking full time Electronic Repair and Calibration Technicians. In this position you will repair, calibrate and certify analyzers, barometers, baths, circuit breaker testers, controllers, counters, current clamps, current injectors, dead weight testers, dielectric testers, dry block calibrators, gauges, gas detectors, generators, high voltage dividers, humidity instruments, insulation testers, manometers, multimeters, oscilloscopes, pressure instruments, power supplies, recorders, scales, tachometers, temperature instruments, and many other types of test, measurement and calibration instrumentation.
We offer Mobile Repair and Calibration services to our customers. You will be required to work in the field approximately 40% of the time.
We have the latest and most accurate standards in the industry, and our FRIDA software system allows our technicians to quickly add and track all assets, document calibration findings, and print certificates.
We are a growth company where employees enjoy a progressive work environment with competitive salaries and career advancement. The pay for this position is between $17.00 and $20.00 per hour.
Qualified candidates must have a clean driving record (no moving violation within the last 3 years) and a valid Texas driver's license. A criminal background check and drug test is required.
Please email your resume to Craig Morris. The email address is craig.morris@instrumentservices.com.
Mechanical Calibration Technician -- 8/1/08
SIMCO Electronics
Minneapolis, MN
SIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. Today, SIMCO Electronics is headquartered in Sunnyvale, CA with a worldwide network of laboratories and international field service teams providing localized support.
SIMCO Electronics' strategic emphasis is to provide enhanced program management systems and services for customers' test and measurement equipment needs. One global service provider improves quality control and compliance of services while reducing total program costs.
The principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics' competencies and a central focus of capital investments and strategic initiatives.
We currently have an immediate opportunity for a Mechanical Calibration Technician at our facility in Minneapolis, MN.
The Mechanical Calibration Technician will perform mechanical calibrations and/or repairs on general hand tools, pipettes, CMM's and linear measuring devices.
DESIRED EXPERIENCE
COMPENSATION and BENEFITS
SIMCO provides employees with a complete benefits package starting the 1st day of the month following hire, including Medical, Dental, Life, Vacation, PTO, Short Term Disability and Long Term Disability insurances, Educational Assistance and 401(k) with company matching.
This is a team atmosphere primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, and the position could require some travel. This is a regular full time position.
SIMCO Electronics is proud of our diversity and equal opportunity employment practices.
Please send resumes to: Colleen.Maxwell@simco.com
Electronic Calibration Technician -- 8/1/08
SIMCO Electronics
Redmond, Washington
SIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. Today, SIMCO Electronics is headquartered in Sunnyvale, CA with a worldwide network of laboratories and international field service teams providing localized support.
SIMCO Electronics' strategic emphasis is to provide enhanced program management systems and services for customers' test and measurement equipment needs. One global service provider improves quality control and compliance of services while reducing total program costs.
The principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics' competencies and a central focus of capital investments and strategic initiatives.
We currently have an immediate opportunity for an Electronic Calibration Technician at our Redmond, Washington Lab.
The Electronic Calibration Technician will perform calibrations of Test Measurement and Diagnostic Equipment used in the Life Sciences, RF/Telecommunications, and Semiconductor/Electronic Components markets. The Electronic Calibration Technician may also repair Test Measurement and Diagnostic Equipment down to component level.
DESIRED EXPERIENCE
COMPENSATION and BENEFITS
SIMCO provides employees with a complete benefits package starting the 1st day of the month following hire, including Medical, Dental, Life, Vacation, PTO, Short Term Disability and Long Term Disability insurances, Educational Assistance and 401(k) with company matching.
This is a team atmosphere primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, and the position could require some travel. This is a regular full time position.
SIMCO Electronics is proud of our diversity and equal opportunity employment practices.
Please send resumes to: Colleen.Maxwell@simco.com
RF Calibration and Repair Technicians -- 8/1/08
SIMCO Electronics
SIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. Today, SIMCO Electronics is headquartered in Sunnyvale, CA with a worldwide network of laboratories and international field service teams providing localized support.
SIMCO Electronics' strategic emphasis is to provide enhanced program management systems and services for customers' test and measurement equipment needs. One global service provider improves quality control and compliance of services while reducing total program costs.
The principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics' competencies and a central focus of capital investments and strategic initiatives.
We currently have opportunities for a RF Calibration and Repair Technicians at our facilities throughout the U.S.
The ideal candidate will be able to perform routine and complex work related to the calibration of electronic, electro-mechanical and mechanical test and measurement equipment. The successful candidate will provide field maintenance on equipment, when required, using calibration procedures and measurement systems on customer equipment in compliance with requirements.
DESIRED EXPERIENCE
COMPENSATION and BENEFITS
SIMCO provides employees with a complete benefits package starting the 1st day of the month following hire, including Medical, Dental, Life, Vacation, PTO, Short Term Disability and Long Term Disability insurances, Educational Assistance and 401(k) with company matching.
This is a team atmosphere primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, and the position could require some travel. This is a regular full time position.
SIMCO Electronics is proud of our diversity and equal opportunity employment practices.
Please send resumes to: Colleen.Maxwell@simco.com
Outside Sales Representative/Account Manager -- 8/1/08
SIMCO Electronics
Washington DC
SIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. Today, SIMCO Electronics is headquartered in Sunnyvale, CA with a worldwide network of laboratories and international field service teams providing localized support.
SIMCO Electronics' strategic emphasis is to provide enhanced program management systems and services for customers' test and measurement equipment needs. One global service provider improves quality control and compliance of services while reducing total program costs.
The principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics' competencies and a central focus of capital investments and strategic initiatives.
We currently have an immediate opportunity for an Outside Sales Representative/Account Manager in the Washington DC area.
This individual will be responsible for the creation and implementation of an effective business development strategy with potential new and existing accounts within Washington DC to maximize SIMCO's market penetration in the assigned territory. The responsibilities of the Account Manager will be:
The ideal candidate will be an independent, self-starter with a minimum of 4 years of outside sales and account management experience and will be able to meet the position's objectives with limited direct supervision. The leading candidate will hold a Bachelor's Degree in engineering, manufacturing, quality, marketing or business. Candidates with a strong background in high technology sales, service contract sales and experience in the semiconductor, electronic component, or computing markets will be given favorable consideration. Those holding degrees in other areas, but with significant experience in the aforementioned markets, may also be considered. The ideal candidate will also be proficient in the use of MS Office Suite. Occasional air travel and overnight stays will be required. Both written and verbal communication skills are extremely important.
COMPENSATION and BENEFITS
SIMCO provides employees with a complete benefits package starting the 1st day of the month following hire, including Medical, Dental, Life, Vacation, PTO, Short Term Disability and Long Term Disability insurances, Educational Assistance and 401(k) with company matching.
This is a team atmosphere primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, and the position could require some travel. This is a regular full time position.
SIMCO Electronics is proud of our diversity and equal opportunity employment practices.
Please send resumes to: Colleen.Maxwell@simco.com
Technical Sales Executive /Engineering Manager
I have been in Metrology field for about 22 years in USA and I have worked for three different companies in the same field. I have played different roles as Applications Engineer, Engineering Manager, Principal Engineer and now presently as General Manager & VP of Sales. I am dealing with directing the sales and marketing efforts to promote three major product lines through Key Accounts Managers, Regional Sales Managers, Domestic Rep. Organizations and International Distributors. Though I have been in Sales & Marketing for over 12 years (7 years of which in senior levels), I have a strong technical background in Electrical & Computer Engineering and played heavily in product development in different companies. I am very aggressive in my techniques and I have great liaison with customers and distributors alike. Customers love to deal with sales people who have strong technical background. I am seeking a Technical Sales Position or as an Engineering Manager.
If you have any questions, please feel free to call me on my cell at (818) 521-0878.
Kris Chellappa
cmuthukris@sbcglobal.net
Download resume for Kris Chellappa.
Calibration/Metrology – 10 yrs PMEL, 10 yrs Microwave Communication
I am seeking an opening in Calibration/Metrology. I am 20 years USAF retired with 10 years PMEL and 10 years Microwave Communication. I have been employed at Tucker Electronics, TesCom and Davis Calibration (all in Texas), plus while employed at Professional Testing Inc., I calibrated EMC/EMI Test Equipment, Antenna and performed NSA Site Calibration. I have a BS in Electrical Engineering Technology from Texas Tech University. I have also performed ISO 17025 Quality Assurance Engineering Tasks and prepared Professional Testing Inc., for NVLAP, NEMKO and MET Accreditation Audits. I have written Calibration Procedures for EMC/EMI Test Equipment in accordance with Industry Standard Guidelines. Thank you for your time, effort and consideration.
Rene A. Vargas
512-709-6886
vargas.rene46@yahoo.com
Download resume for Rene A. Vargas
Electronics Technician – Dallas/Fort Worth, TX
I am currently seeking a career in the Calibration/Metrology Industry in the Dallas/Fort Worth area as a Technician. I am a highly motivated Electronics Technician, experienced in the application of advanced principles in metrology. Good working knowledge of industry's most current M&TE Standards. I am self-motivated and capable of performing complex calibrations and repairs in accordance with the ISO/IEC 17025:2005, ISO 9001:2008, ISO 10012:2003 and ANSI/NCSL Z540-1 (R2002) Standards. I have been involved in the design and implementation of a 57XX Golden calibration station, which is used for the calibration of Wavetek 4950, Agilent 3458A and Fluke 8508A Metrology Grade Reference Multimeters. These changes resulted in decreased uncertainties, allowed for both Z540 and Accredited calibrations, higher technician productivity and increased revenue, which allowed higher profit margins to be realized by the Service Center. My work ethic, integrity and discipline come from having served in the military. I have exceptional organizational, communication, interpersonal and computer skills. I am cross-trained in Shipping and Receiving, Order Processing, and Type II Lab Technician.
My resume is attached, which contains additional details about my background and work experience. Thank you for your consideration.
Ubaldo Salazar
214-538-1938
Ubaldo.salazar@live.com
Download resume for Ubaldo Salazar
Metrology Technician with 25 years Experience — Arizona
I would like to find employment in Arizona or part time in another location. My skills are primarily in physical dimensional work. I spent a large percent of the previous 5 years calibrating and rebuilding platinum profile and base metal thermocouples, rebuilding freeze points and furnaces.
James C. Guy
480-899-8521
metrology_guy@yahoo.com
Download resume for James C. Guy
12 Yrs Calibration Experience with CMM Programming Experience
12 years calibration experience with CMM programming experience. Would like to work out in the field. Onsite calibrations, 3rd party inspections. Very personable with a high sense of quality.
Rick Troutman
Download resume for Rick Troutman.
Senior Metrology Technician
Over 35 years experience in the Calibration Industry
20 years in the USAF, 16 years in PMEL
18 years as a Senior Metrology technician most at Tucker Electronics in Garland, Texas
For more information please contact:
George C. Bowe Jr.
gcbojr@aol.com
972-824-6793
Electro-Mechanical, Repair, Maintenance, Test, Calibration & Installation 20+ years - Dallas/Fort Worth Area
I have been working, in the field of Electro-Mechanical, Repair, Maintenance, Test, Calibration & Installation for more than twenty years. I can tune-up car engines, upgrade computers, test, repair & calibrate most anything, be it mechanical, electronics, hydraulics, pneumatics, PLCs, electrical, vacuum, nuclear & yes, even truck-driver. I have the experience to be an asset to any company. I have the equivalent of a Bachelors Degree in Electro/Mechanical Technology, in the Dallas/Fort Worth Area.
John Randy Smith
jrsmith82@sbcglobal.net
Download resume and cover letter for John Randy Smith
Versatile Metrologist 22 yrs. Applied Expr - 8 yrs Supervisory Expr in Lab Management
Versatile Metrologist with 22 years applied experience and 8 years of successful supervisory experience in Lab Management. Identified problems and developed solutions utilizing a participative management style. Specific expertise includes:
Gary R. Mote
measurand2@yahoo.com
Download resume for Gary R. Mote.
Software Developer with 26 years in Metrology field
I have been working in the field of Metrology for 26 years and have been a Fluke MetCal developer for eleven years. Until recently I was employed by Intercal LLC, an automation software developer. Economic setbacks have caused Intercal to lay me off after nine years.
At Intercal I have
Prior to working at Intercal, I developed automation software and systems for the cal lab at ITT Industries as well as serving as senior a engineering technician in the cal lab. Before that I was a US Navy Cal tech.
I can begin working remotely immediately from my home in Oregon as a s/w developer or I will be able to move near one of your facilities after school lets out this summer to serve as developer and or cal technician. I understand the need for automation in the cal lab and I can develop a superior product that will enable myself and your technicians to standardize test methods and increase production while reducing costs, out sourcing and turn-around time.
Joseph E Hansen
541-621-3146
Lucemon2325@yahoo.com
Download resume for Joseph E Hansen
Metrology Technician+
While at Keithley Instruments, I have been working in the Standards Laboratory calibrating the standards used throughout the company to calibrate the instruments that they manufacture. Although I have a lot to learn, I began making contributions to the lab in my first week of employment and have learned the proper techniques in performing low-level measurements. After only being employed for a month, I performed the characterization of an Agilent 3458A multimeter and the calibration of a Fluke 5720A/03 Calibrator during the re-accreditation of our ISO 17025 certification. I am currently in the process of training on the MI 6000B Automatic High Resistance Ratio Bridge. In my tenure at Keithley Instruments, I have managed to become proficient in over (100) calibration procedures. Also, I have taken the Quametec Institute of Measurement Technology Uncertainty Analysis course and will be receiving my certification shortly.
Download resume for Bob Dodds
Metrology Engineer (Dimensional Metrologist)
Download resume for Abu Mohamed Ali.
8 Year Metrologist – North Dakota State Weights and Measures Metrology Laboratory
I am looking for employment in any area related to my qualifications. I can offer:
I would consider relocating to most any Midwestern state.
Download resume, cover letter and references for Kevin Hanson.
Calibration Technician
American Society for Quality Certified Calibration Technician, ASQ CCT (reference no. 680), with over nine years solid working experience in calibration, metrology and repair of test and measuring instruments. Recognized for attention to detail, adherence to standards, and expert technical background.
Download resume for Rainnier B. Lauguico, ASQ CCT
Sr. Metrological Scientist - San Diego, CA Area (will travel)
My name is Charles Drew and I am interested in a metrology position in the San Diego area but will travel. I am currently the senior Metrological scientist at a contract research organization, where I head the metrology department performing data acquisition, troubleshooting, and repairs on Mass spectrometers and High performance Liquid chromatography systems. My other duties include the calibration, testing, and installation of all current and incoming electronic laboratory systems, pharmaceutical storage and shipping, SOP review and customer support. I was an electronics technician in the US navy for 6 years and have a BS in Biology from the University of South Carolina. I am self motivated with good communication skills and I have dealt with sensitive government and private sector equipment for over 7 years.
Thank you for your consideration.
Charles Drew
619-618-9112
Metrologist - Charleston, SC
I have 12+ years experience as a metrologist (10 years in the US Air Force.) I am currently working at the TMDE Support Center, Cairns Army Air Field, Ft. Rucker, AL. I would like to relocate to Charleston, SC. I am not interested in work in any other location at this time.
My resume is attached. Thank you.
Calibration Technician
Experienced calibration technician with a military background. Three years of working experience in the U.S. Navy as an electronic/physical dimensional calibration technician. Advanced knowledge of technical publications, component troubleshooting, quality assurance, problem solving and safety. Both operation and troubleshooting experience with most major standards necessary for calibration such as; oscilloscopes, signal generators, electronic counters, arbitrary waveform generators, GPS frequency standards, high precision multimeters, spectrum analyzers, peak power analyzers etc. Multiple college level courses in the operation of computer systems. Extensive experience in communication with both technical staff and customers. Highly motivated with a military inspired work ethic.
Download resume for Edward C. Davis.
Calibration Technician/ Engineer
5 years experience in Jordanian Air Force - DC. LF and microwave repair and calibration. BS degree in Electronics and Communications Engineering. Would like to relocate to Europe or Canada. Speak English, Arabic and basic French.
Download C.V. for Mazen Hazim Amr.
Calibration Technician - San Diego County
I am currently seeking a career in the Calibration Industry in the San Diego County area as a Technician. I have an AAS Degree in Electronics Servicing and spent 5 years in the Marine Corps as a 6492 Calibration Technician.
Download resume for Jessie Collins.