Loading Events
Find Events

Upcoming Events

Events List Navigation

June 2017
535€

METROAEROSPACE – Padua, Italy

June 21 - June 23
Padua, Italy + Google Map

Following the success of the three editions of IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace), it was considered convenient to promote a fourth edition of this event, which aims at reinforcing and supporting the…

Find out more »
6800 SEK

MET&PROPS 2017 – Gothenburg, Sweden

June 27 - June 29
Clarion HOTEL POST, Drottningtorget 10 411 03
Gothenburg, Sweden
+ Google Map

16th International Conference on METROLOGY and PROPERTIES of ENGINEERING SURFACES The conference fee includes reception, lunches, refreshments, symposium banquet, and  conference material. Registration (VAT moms 25% included) Until 1May  2017  6800 SEK After 1 May…

Find out more »
$3250

MET-302 Introduction to Measurement Uncertainty

June 27 - June 29

This course will teach you how to develop uncertainty budgets and how to understand the necessary calibration processes and techniques to obtain repeatable results. Course Topics: What is Uncertainty in a Measurement? Introduction to Basic…

Find out more »
July 2017
£50

Flow Measurement Institute Conference – Coventry UK

July 11
Coventry University, Priory St CV1 5FB United Kingdom + Google Map

June 21, 2017, TUV NEL - The third annual Flow Measurement Institute Conference is due to take place at Coventry University on the 11th of July. NEL staff will be presenting at the event, which…

Find out more »
$475

National Conference on Weights & Measures Annual Meeting – Pittsburgh, PA

July 16 - July 20
Pittsburgh, PA United States + Google Map

The National Conference on Weights and Measures is a professional nonprofit association of state and local weights and measures officials, federal agencies, manufacturers, retailers and consumers. NCWM has developed national weights and measures standards since…

Find out more »

The Coordinate Metrology Society Conference (CMSC) – Snowbird, UT

July 17 - July 21
Snowbird, UT United States + Google Map

At this practical, user-driven metrology conference you will learn and immediately be able to implement your newfound knowledge into your workplace. With direct interaction from over 400 end users of metrology solutions including developers, decision…

Find out more »
$3250

MET-101 Basic Hands-on Metrology

July 17 - July 20

This course introduces the student to basic measurement concepts, basic electronics related to measurement instruments and math used in calibration. We will also teach various techniques used to make good measurements using calibration equipment. The…

Find out more »

IMEKO – Rio de Janeiro, Brazil

July 31 - August 3
Rio Othon Palace, Avenida Atlântica, 3264, Copacabana
Rio de Janiero, RJ Brazil
+ Google Map

The 2017 Joint IMEKO TC1-TC7-TC13 Symposium: “Measurement Science Challenges in Natural and Social Sciences” will be held in Rio de Janeiro, Brazil, from July 31st to August 3rd 2017. The Joint Symposium is organized by the Brazilian Society of…

Find out more »
August 2017

Seminar 114: Hands-On Gage Calibration

August 1 - August 3
Mitutoyo M3 Center, 965 Corporate Blvd
Aurora, IL 60502 United States
+ Google Map

The Hands-On Gage Calibration course is a unique, active, educational experience designed specifically for those who plan and perform calibrations of dimensional measuring tools, gages, and instruments. This course is taught at the world-class, Mitutoyo…

Find out more »
$250

Interactive Calibration Workshop 2017

August 2 - August 3
Harvard Faculty Club, 20 Quincy St
Cambridge, 02138 United States
+ Google Map

Beamex is proud to announce that registration is open for the 2017 Best Calibration Practices: Interactive Workshop! This education-driven, interactive workshop is designed to equip managers, engineers and technicians with strategies for improving daily calibration…

Find out more »

NCSL International Workshop & Symposim – National Harbor, MD

August 13 - August 17
Gaylord National Convention Center, 201 Waterfront Street
National Harbor, MD 20745 United States
+ Google Map

"Precision & Performance with Measurement Science" The NCSLI Annual Meeting & Exposition provides you with a three day pre-conference program that includes tutorials and three days dedicated to your professional development and networking. While we…

Find out more »
$850.00

Internal Auditing to ISO/IEC 17025

August 21 - August 23
Hilton Memphis, 939 Ridge Lake Blvd
Memphis, TN 38120-9407 United States
+ Google Map

This 2.5-day course is designed to develop your understanding of internal auditing techniques against the ISO/IEC 17025 requirements. http://anab.org/training

Find out more »
$745.00

Fundamentals of Measurement Uncertainty

August 24 - August 25
Hilton Memphis, 939 Ridge Lake Blvd
Memphis, TN 38120-9407 United States
+ Google Map

Memphis, TN. ANAB. Attendees of this 2-day course will learn a practical approach to measurement uncertainty applications, based on fundamental practices. Measurement uncertainty for both testing and calibration laboratories will be discussed. Attendees will gain…

Find out more »
£375

Advanced Mathematical and Computational Tools in Metrology and Testing XI – Glasgow, Scotland

August 29 - August 31
University of Strathclyde, 99 George St
Glasgow, G1 1RD United Kingdom
+ Google Map

The conference is an IMEKO TC21 event and is organised by the National Physical Laboratory (NPL), in conjunction with the University of Strathclyde. The overall aims of the conference series are to provide a multi-disciplinary forum…

Find out more »
$199

Document Control and Record Keeping – WEBINAR

August 30 @ 12:00 pm - 2:00 pm MDT

This 2 hour webinar will introduce the fundamentals of Laboratory Management System Document Control and Record Keeping that are necessary to successfully implement ISO/IEC 17025. The current fee for webinars is $199. The payment deadline…

Find out more »
September 2017
$995

AUTOTESTCON – Schaumburg, IL

September 9 - September 14
Renaissance Schaumburg Convention Center Hotel, 1551 N Thoreau Dr
schaumburg, IL United States
+ Google Map

AUTOTESTCON is the world’s premier conference that brings together the military/aerospace automatic test industry and government/military acquirers and users to share new technologies, discuss innovative applications, and exhibit products and services. It is sponsored annually…

Find out more »

Dimensional Metrology

September 12 - September 14
Mitutoyo M3 Center, 965 Corporate Blvd
Aurora, IL 60502 United States
+ Google Map

Dimensional metrology – the science and practice of dimensional measurement – is the fundamental educational series of the Mitutoyo Institute of Metrology. The full curriculum consists of (1) free online educational material, (2) the 2-day…

Find out more »
$650.00

Introduction to ISO/IEC 17025

September 14 - September 15
The CURTIS Denver, 1405 Curtis St
Denver, CO 80202 United States
+ Google Map

Denver, CO. ANAB. This 1.5-day course will help attendees understand and apply the requirements of ISO/IEC 17025. Attendees will examine the origins of the standard and learn about practical concepts such as document control, internal…

Find out more »
984€

CIM2017 – Paris, France

September 19 - September 21
Paris Expo Porte de Versailles, 1 Place de la Porte de Versailles
Paris, 75015 France
+ Google Map

18th International Metrology Congress - "Measure to create the future" R&D and BEST PRACTICES for MEASUREMENT in INDUSTRY The International Metrology Congress will be back from 19 to 21 September 2017 in Paris (France), alongside…

Find out more »

Seminar 114: Hands-On Gage Calibration

September 19 - September 21
Mitutoyo M3 Center, 965 Corporate Blvd
Aurora, IL 60502 United States
+ Google Map

The Hands-On Gage Calibration course is a unique, active, educational experience designed specifically for those who plan and perform calibrations of dimensional measuring tools, gages, and instruments. This course is taught at the world-class, Mitutoyo…

Find out more »

IEEE International Workshop on Measurements & Networking – Naples, Italy

September 27 - September 29
Centro di Servizi Metrologici Avanzati (CeSMA), Cupa Nuova Cintia, 21
naples, Italy
+ Google Map

The IEEE International Workshop M&N represents a forum for researchers and practitioners from industry, academia, and government involved in the area of modelling, measurement and quantitative evaluation of communication networks, sensor networks and distributed infrastructures.

Find out more »
October 2017
$1395

ISO/IEC 17025 Lead Assessor Training

October 2 - October 6
Hyatt Regency San Antonio, 123 Losoya St
San Antonio, TX 78205 United States
+ Google Map

San Antonio, TX. ANAB. This 4.5-day course will enable attendees to develop a solid understanding of the ISO/IEC 17025 standard and be able to plan and lead an ISO/IEC 17025 assessment. http://anab.org/training/

Find out more »
$3250

MET-101 Basic Hands-on Metrology

October 2 - October 5

This course introduces the student to basic measurement concepts, basic electronics related to measurement instruments and math used in calibration. We will also teach various techniques used to make good measurements using calibration equipment. The…

Find out more »
€390

3D Metrology Conference – Aachen, Germany

October 9 - October 11
Aachen Stadium Tivoli, Aachen, Germany + Google Map

Following the highly successful inaugural 3D Metrology Conference and exhibition last year, the organising committee is pleased to announce 3DMC 2017, which will be held in the Tivoli sports stadium at Aachen, Germany. 3DMC is…

Find out more »
$3250

MET-301 Advanced Hands-on Metrology

October 9 - October 12

This course introduces the student to advanced measurement concepts and math used in standards laboratories. The student will learn how to make various types of measurements using different measurement methods. We will also teach techniques…

Find out more »

Seminar 114: Hands-On Gage Calibration

October 10 - October 12
Mitutoyo M3 Center, 965 Corporate Blvd
Aurora, IL 60502 United States
+ Google Map

The Hands-On Gage Calibration course is a unique, active, educational experience designed specifically for those who plan and perform calibrations of dimensional measuring tools, gages, and instruments. This course is taught at the world-class, Mitutoyo…

Find out more »
$3500.00

VNA Tools – VNA Metrology and Uncertainty Workshop – Ontario, Calif.

October 17 - October 19
Maury Microwave, 2900 Inland Empire Blvd.
Ontario, CA 91764 United States
+ Google Map

VNA Tools is free and supports most of the Vector Network Analyzers (VNAs) in today’s market. The software simplifies your tasks of generating accurate measurement uncertainty and vindicating metrological traceability. The software is ideal for…

Find out more »

ASPE Annual Meeting – Charlotte, NC

October 29 - November 3
Westin Charlotte, Charlotte, NC United States + Google Map

The American Society for Precision Engineering (ASPE) promotes the future of manufacturing in America by advancing precision engineering through supporting education and encouraging the development and application of precision principles. ASPE members represent a variety…

Find out more »
November 2017

Seminar 114: Hands-On Gage Calibration

November 7 - November 9
Mitutoyo M3 Center, 965 Corporate Blvd
Aurora, IL 60502 United States
+ Google Map

The Hands-On Gage Calibration course is a unique, active, educational experience designed specifically for those who plan and perform calibrations of dimensional measuring tools, gages, and instruments. This course is taught at the world-class, Mitutoyo…

Find out more »
CHF2762

VNA Tools – VNA Metrology and Uncertainty Workshop – Switzerland

November 7 - November 9
Federal Institute of Metrology METAS, Lindenweg 50
Bern-Wabern, 3003 Switzerland
+ Google Map

VNA Tools is free and supports most of the Vector Network Analyzers (VNAs) in today’s market. The software simplifies your tasks of generating accurate measurement uncertainty and vindicating metrological traceability. The software is ideal for…

Find out more »
$850.00

Internal Auditing to ISO/IEC 17025

November 13 - November 15
Sheraton Fisherman’s Wharf, 2500 Mason St
San Francisco, CA 94133-1450 United States
+ Google Map

San Francisco, CA. ANAB. This 2.5-day course is designed to develop your understanding of internal auditing techniques against the ISO/IEC 17025 requirements. http://anab.org/training

Find out more »
$745.00

Fundamentals of Measurement Uncertainty

November 16 - November 17
Sheraton Fisherman’s Wharf, 2500 Mason St
San Francisco, CA 94133-1450 United States
+ Google Map

San Francisco, CA. ANAB. Attendees of this 2-day course will learn a practical approach to measurement uncertainty applications, based on fundamental practices. Measurement uncertainty for both testing and calibration laboratories will be discussed. Attendees will…

Find out more »
December 2017
$2200

Fundamentals of Metrology

December 4 - December 8
NIST, 100 Bureau Drive
Gaithersburg, MD 20899-2600 United States
+ Google Map

The Fundamentals of Metrology seminar will introduce the participant to the concepts of measurement systems, units, measurement uncertainty, measurement assurance, traceability, basic statistics and how they fit into the laboratory Quality Management System. Additional topics…

Find out more »

Gulf Metrology Forum – Doha, Qatar

December 4 - December 6
Doha, Qatar, Doha, Qatar + Google Map

"Metrology for the energy sector" After a successful the First GCC metrology Forum on December 2015 which reflected positively on the GCC metrology sector a collective need for upgrading the metrology infrastructure was seen as…

Find out more »

Seminar 114: Hands-On Gage Calibration

December 5 - December 7
Mitutoyo M3 Center, 965 Corporate Blvd
Aurora, IL 60502 United States
+ Google Map

The Hands-On Gage Calibration course is a unique, active, educational experience designed specifically for those who plan and perform calibrations of dimensional measuring tools, gages, and instruments. This course is taught at the world-class, Mitutoyo…

Find out more »

Dimensional Metrology

December 12 - December 14
Mitutoyo M3 Center, 965 Corporate Blvd
Aurora, IL 60502 United States
+ Google Map

Dimensional metrology – the science and practice of dimensional measurement – is the fundamental educational series of the Mitutoyo Institute of Metrology. The full curriculum consists of (1) free online educational material, (2) the 2-day…

Find out more »
March 2018
$350

ISFFM – Querétaro, Mexico

March 21, 2018 - March 23, 2018
Hotel Misión Juriquilla, Blvd. Villas del Mesón 56, col. Juriquilla
Querétaro, Querétaro 76230 Mexico
+ Google Map

Learn about the latest updates in fluid flow measurement and a wide variety of research and technology topics associated with it at the 2018 International Symposium on Fluid Flow Measurement (ISFFM). Fluid flow measurement professionals…

Find out more »
April 2018
€550

CAFMET – Marrakech, Morocco

April 9, 2018 - April 12, 2018
Les Jardins de l’Agdal, Avenue Mohammed VI
Marrakech, 40 000 Morocco
+ Google Map

The African Committee of Metrology (CAFMET) is organizing the 7th International Conference of Metrology in Africa – CAFMET 2018, which will be a Metrology forum to share information, ideas and experiences, during conferences, open discussions,…

Find out more »
Free

FORUMESURE – Marrakesh, Morocco

April 9, 2018 - April 11, 2018
Les Jardins de l’Agdal, Avenue Mohammed VI
Marrakech, 40 000 Morocco
+ Google Map

FORUMESURE is an annual event, for companies and also institutions wishing to present their know-how, new products and services to hundreds of international visitors. This event is organized by The African Committee of Metrology (CAFMET).…

Find out more »
July 2018

CPEM2018

July 8, 2018 - July 13, 2018
Maison de la Chimie, 28 rue Saint-Dominique
Paris, 75007 France
+ Google Map

The Laboratoire national de métrologie et d’essais LNE), in collaboration with the Centre national de recherche scientifique (CNRS) and the Observatoire de Paris, is pleased and proud to host the 2018 Conference on Precision Electromagnetic…

Find out more »
+ Export Events

CIM2017 - Paris, France