IET Labs Releases PRS-330 and PRS-370 Programmable Resistors

IET Labs has released the PRS-370 and PRS-330 to meet the ever-growing demand to automate source resistance in calibration laboratories and production environments.

The PRS-330 dramatically improves the most important aspects of the earlier manual resistance decades. It introduces an advanced algorithm to create an easy to use programmable decade resistor with 30% improved accuracy, less than 70 ppm and 1000 times better resolution, 1 μΩ, or 6 digits, than traditional laboratory decade boxes and RTD Simulators. The PRS-330 comes standard with USB, Ethernet, IEEE 488 interfaces, and user-selectable front and rear binding posts. The large color touchscreen and intuitive interface promotes little to no training and simplifies manual use.

The PRS-370 was explicitly designed for calibration laboratories, and when used with a Fluke 8508A or Keysight 3458A can achieve an accuracy of less than 10 ppm. This makes the PRS-370 a short-term stable programmable standard of resistance. The PRS-370 makes sure you always have the right resistance standard to calibrate new instruments. The PRS-370 features an IEEE-488 interface that can either control the 8.5 digit DMM or be controlled via PC. The easy to read graphical color touchscreen shows the target resistance, Δ from nominal, measured resistance from the DMM and the measurement accuracy of the DMM.

Benjamin Sheena, Worldwide Sales Manager for IET Labs, says, “The PRS-370 will make you rethink, the decade resistor, extremely tight accuracy, no long-term maintenance costs, and leverages the performance of the 8.5 Digit DMM you already own. IET Labs received U.S. Patent 10,191,084 due to the significant advancements the PRS-370 has over existing programmable decade resistors in the market today.”

With its industry leading 5-year warranty all aspects of the PRS-330 and PRS-370 are focused on reliability, reduced ownership costs and simplicity out of the box.

IET Labs is proud to manufacture the PRS-330 and PRS-370 in the USA.

IET Labs, is a leading provider of Decade Resistors, Inductance and Capacitor Standards, Megohmmeters, Stroboscopes, and LCR Meters.

For more information see:
PRS-330 Programmable Decade Resistor
PRS-370 Self-adjusting Programmable Resistor

For further information contact:
IET Labs, Inc.
1 Expressway Plaza Roslyn Heights NY 11577
516-334-5959
info@ietlabs.com