Articles Published in Cal Lab Magazine
by Andrew Dawson, Ph.D. While the nominal vertical resolution of a high-speed waveform digitizer (specified in bits) is often promoted, its true performance is provided by its measured Dynamic Parameters and in particular by its […]
by Peter de Groot Over the last few decades, additive manufacturing (AM)/3D printing has fundamentally changed the way that manufacturers approach product development. Industry is now almost universally aware of the term rapid prototyping, using […]
by Dan Wiswell I’m not sure when it occurred exactly, but sometime during the age of reason there used to be an educated group of people that were called philosophers. The term itself defined these […]
by Michael Schwartz & David Kimery With today’s worldwide cloud-based computing solutions, downtime is not an option! Not even for scheduled system maintenance and updates. Customers want ZERO downtime, no exceptions. But how can we, […]
by Ryan Egbert & Joseph Rindone The following article is the last of a four-part Metrology 101 series focusing on temperature. The written content provided here is also intended to be combined with demonstration videos […]
by Hening Huang This technical note reports a case study that addresses a challenge of interlaboratory consensus building called for by Possolo (2020). The consensus value is estimated as a weighted-average (WA) and the associated […]
by Henry Zumbrun There is a bit of a disconnect regarding risk mitigation practices in the metrology and calibration provider community. Most likely, this comes from a misunderstanding of terminology or legacy requirements that have […]
There is a hidden cost in developing and supporting automated calibration procedures, that is the cost of supporting and updating the software after the initial development cost. The industry sets an average metric of 80%. […]
Copyright © 2011-2024 | Cal Lab Solutions, Inc.