2021 – Page 5 – Cal Lab Magazine

New R&S NGA100 Basic Power Supplies

April 22, 2021 Office

Simply providing DC electricity is the purpose of a basic power supply, the piece of test equipment most commonly found on workbenches around the world. The R&S NGA100, a new series of basic power supplies […]

New Lateral Excitation Stand from MB Dynamics

April 22, 2021 Office

April 21, 2021 – Cleveland, Ohio, USA – MB Dynamics, Inc. (www.mbdynamics.com), field-proven industry experts in the design, manufacture and supply of vibration test systems and equipment, including buzz, squeak and rattle (BSR), steering, and suspension […]

NASA’s Perseverance rover commences cutting-edge scientific measurements on Mars with Finnish equipment

April 19, 2021 Office

Vaisala and Finnish Meteorological Institute Press Release April 15, 2021 NASA’s Perseverance rover has now spent its first months on the surface of Mars. The testing and deployment phase is proceeding well, and after the […]

Temperature Calibrations, Part 1

March 29, 2021 Office

by Ryan Egbert & Joseph Rindone The following article is part one of a four-part Metrology 101 series focusing on temperature. The written content provided here is also intended to be combined with demonstration videos […]

Project of an Automated Multiple Decade Ratios Precision Divider for Generation of Low DC Voltages

March 29, 2021 Office

by Flavio Galliana, Roberto Cerri, & Davide Corona At the National Institute of Metrological Research (INRIM) an automatable precision DC voltage fixed-ratios divider allows the division ratios of DC Voltages from 10:1 to 107:1. It […]

Selecting a Calibration Management Software System in a Regulated Environment

March 29, 2021 Office

by Walter Nowocin Selecting a Calibration Management Software System is a critical process for a calibration laboratory, especially in a bio-medical regulated environment. However, there are few examples or documents that explain this process from […]

TCP/IP & The Mini-Calibration Network

March 29, 2021 Michael Schwartz

Today, many of the units coming in for calibration don’t have a GPIB interface. All they have are a Universal Serial Bus (USB) or a TCP/IP Local Area Network (LAN) interface. When connected to the […]

Measurement data in IoT networks

March 26, 2021 Office

PTB News 2.2021 PTB offers users from industry a new service. It can now validate whether measurement data that are transmitted within IoT networks comply with essential metrological requirements. For this purpose, PTB’s TraCIM service, […]